Permanent Metal Filters0 pages

®

• 1", 2" and 4" Thicknesses

• Rugged All Metal Construction

• Low Resistance

• Washable

Designed for Tough Applications

Airguard permanent metal filters are suitable

for use in very difficult operating conditions

including high velocity (up to 900 FPM),

high temperature, high moisture, corrosive

environments, oil or grease laden air.

Type HD - Steel

Media - The media consists of multiple layers

of pleated and flat steel screen wire to provide

an intricate maze of dirt catching surfaces.

Multiple layers of media offer maximum filter

surface area. Heavy gauge expanded metal

grids on both sides protect the media and add I

rigidity to the filter construction.

Frame - The frame is made from a single

piece of heavy gauge aluminum channel with

mitered corners for extra strength. The frame

is predrilled with holes to allow water to drain

Type HD - Steel

Type HS - Aluminum

Permanent Metal Washable Filters

Type HS - Aluminum

Media - The media consists of multiple layers of

pleated and flat aluminum screen wire to provide an

intricate maze of dirt catching surfaces. Multiple layers

of media offer maximum filter surface area. Heavy

gauge expanded metal grids on both sides protect the

media and add rigidity to the filter construction.

Frame - The frame is made from a single piece of 24

gauge galvanized steel channel with mitered corners

for extra strength. The frame is predrilled with holes to

allow water to drain.

Washable For Repeated Use

Permanent metal filters can be cleaned by flushing with

a hose, washing in warm soapy water or steam cleaned.

Allow filters to dry, then re-install. With proper care and

handing, metal filters can provide years of dependable

service.

Both styles of filters are available with bail type lift

handles.