87 series0 pages
Specifications
Size: E87,F87
Torque: 5000-10,000 in/lbs
Voltage: 120 VAC 1 Ph 50/60Hz
AMP Draw: E87 1,7 F87 2.2
Conduit Entry: Two (2) 3.4" FNPT
Max Ambient Temp: 150º F
Switches: Four (4) single pole, double
throw (4-SPDT) 15 amp rated
Cycle Time per 90º: E87, F87 30 seconds
Series 87 Electric Actuator
Standard Features
• Motor: Reversing, brushless, capacitor run 115 VAC
•
•
•
•
•
•
•
•
•
•
•
50/60 Hz, single phase
Overload protection: Integral thermal overload
protection for motor windings with automatic reset
Gear train: Permanently lubricated
Conduit: Two 3/4” FNPT conduit entries to eliminate
cross feed between control and power signals
Manual override: Push down on
handwheel until engaged with cam and rotate
Limit switches: Standard end of travel limit switches
can be used for light indication (not to be use with
PLC for position confirmation)
Auxiliary (Additional) limit switches: Each electric
actuator is provided as a standard with 2-SPDT
auxiliary limit switches
Enclosure: Type 4X
Mechanical Brake: Each electric actuator is provided
as a standard with a mechanical brake
Corrosion resistant mounting: Mounting is with
stainless steel bracket, stainless steel coupling, and
stainless steel hardware
Output torque: Series 87 Electric Actuators have an
output torque range from 5000 in/lbs to 10,000
in/lbs
PTC Space Heater: A PTC (Positive Temperature
Coefficient) space heater is provided as standard
equipment
Options
• Two-wire control
• Center-off
• Voltages
9.00
10.0 CLEARANCE
FOR COVER REMOVAL
2.14
2x
3/4" NPTF
10.5
2.69
2.69
3.33
3.30
13.5
Max
2.06
12.36
2.06
8.36
4.18
Sample Specification
All Series 87 electric actuators shall have a thermally protected, bi-directional (reversing type), capacitor run motor with a permanently lubricated gear train. Actuator shall
have planetary gearing encompassed in an die-cast
aluminum housing with stainless steel trim, conforming
to Type 4X. Each actuator shall have a manual override,
visual position indication, two (2) auxiliary limit switches, a
PTC heater and a mechanical brake as supplied by
Asahi/America.
Engineering Data
ENGINEERING DATA
Cycle
Time per Weight
Model
90
(lbs)
Torque Amp Duty Amp Duty Degrees
(in/lbs) Draw Cycle Draw Cycle (seconds)
E87 5,000
1.7
50%
1.0
50%
30
34
F87 10,000 2.2
50%
1.2
50%
30
34
115 Vac
230 Vac
• Local Remote Station
178
ASAHI/AMERICA
Rev. F 8-11