SHF500 pages

SHF50

Pneumatic Mallet Actuated Hardwood Flooring Nailer
SHF50 is the industry's only pneumatic hardwood floring
nailer with a work contact safety, which is activated when the
tool is positioned on the florin tongue - not by depressing a
trigger.

Specifications
Item# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reg. Operating Pressure. . . . . . . . . . . . . . . .
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tool Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fastener Capacity . . . . . . . . . . . . . . . . . . . . . .

710001N
70-120 psi (4.8 - 8.3 bar)
3.8" NPT
12 lbs (5.5 kg)
17.75" (451 mm)
16.25" (413 mm)
110

Fastener Specifications
Fastener . . . . . . . . . . . . . . . . . . . . . . .
Fastener Range . . . . . . . . . . . . . . . .
Finish. . . . . . . . . . . . . . . . . . . . . . . . . .
Collation. . . . . . . . . . . . . . . . . . . . . . .

RW

L type cleat nail
1½, 1¾ and 2"
Bright Basic
Glued strip
11/2 13/4

2

.063"

Applications
For the installation of 1/2" (12mm) to 33/32" (26mm)
hardwood flooring. (1/2" applications require optional
adapter.)

Features and Benefits
• Easy on the arm, requiring a single strike of only 4 lbs. of
swing weight to drive fastener.
• Mallet-actuated firing simultaneously sets floor boards
(tongue into groove) and drives cleat nail at an ideal 45˚
angle
• Mallet included
• 1-year limited warranty

For additional information on how SENCO will save you
time, reduce costs, and increase quality, call us at
1-800-543-4596 to find your nearest Authorized Senco
Dealer or Distributor or visit our web site at:
www.senco.com

Sequential Actuation Trigger (also known as restrictive trigger or
trigger fire) operates in the following sequence - depress the safety
element at the nose of tool against the work surface then pull the
trigger. After each fastener is driven, release the trigger and lift the
tool off the work surface before starting the sequence again. This
trigger is recommended and acceptable for most applications.

www.senco.com

Cincinnati Hispanic Fest