Model F62100 pages
| Force | Pressure | Temperature | Switch
Ring force transducer
for bold forces
Description
Features
Designed with small external dimensions these load
cells can be used in a wide range of industrial and
laboratory applications. They are constructed to
measure preload forces with an accuracy of +- 3%
with a linearity range of +-1% to +-3%.
Because of the small design with a low
constructional depth it is needed to pay attention to
the sensitivity of the force transducer to changes of
the mounting position and the load transmission.
Changes in those can lead to a deviation of more
than 30% of the output signal while the linearity does
not change. To avoid this it is needed to adjust the
electronics after the mounting the force transducer.
For the use in variable mounting positions it might be
more suitable to make use of a larger force
transducer or a force transducer with a different
geometry, for example the F6213 models or a force
transducer with ball scraper like the F1210 series.
Note
for compression and prestress
force measurements
2 adapter disks included
compact and small dimensions
simple installation
very low installation height
protection class IP 65
accuracy 1% or 3% of full scale value
Measuring ranges
15 kN ... 500 kN
Applications
Measuring of pretensioning forces
Plant engineering
Screw and pin assembly
Cutting tools
Measurement and inspection equipment
Test setups
In order to avoid overloading, it is advantageous to
connect the load cell electrically during installation
and to monitor the measured value.
The force to be measured must be applied
concentrically and free of transverse force.
The load cells are to be mounted on a plain surface.
Model: F6210
tecsis GmbH
Carl-Legien Str. 40
D-63073 Offenbach / Main
Tel.: +49 69 5806-0
AE 921 f
Sales national
Fax: +49 69 5806-170
Sales international
Fax: +49 69 5806-177
e-Mail: info@tecsis.de
Internet: www.tecsis.de
S. 1 / 3
"