TS6B 6mm Bi-stable Shutters0 pages
TS6B 6mm Bi-stable Shutters
Overview
The TS series is the latest technology available from UNIBLITZ®. This patent pendingdevice has eliminated the
external protruding actuator and contains no other interfering components. The direct-drive system eliminates all
linkages between the actuator andthe shutter blade. The TS6B provides a 6mm clear aperture. The device can also
bescaled for alternate aperture sizes to further tailor the device for the most demandingcustom applications. The TS6B
is a bi-stable shutter and no power is required to hold theshutter in either the open or closed state. Power is required
only to change the state ofthe device. The reliability of this device has been enhanced by containing only twomoving
parts (the rotor and the blade). This, in conjunction with their bi-stable operation,(and when driving the shutter with the
new ED12DSS +12VDC driver) provides the most reliable device of its kind.
As stated, the TS6B can be actuated by the ED12DSS, a new driver built specifically to take advantage of the DSS and
TS series’ low power requirements.
This new driver will permit the TS6B to operate with virtually identical open and close times. The TS6B can also be
operated by the VDM1000 for faster transfer times. The TS6B is available in a bi-stable configuration only. In this
configuration the shutter will not require power to remain in the open or closed position. A short pulse (5ms)of 10.7V
will switch the shutter open, reversing the current with the same pulse will close the shutter.
FEATURES
• Patent Pending single bladed design.
• Shutter mechanism has a flag mounted
internally and has the aperture on center.
• Innovative actuator system radically reduces moving parts to increase reliability.
• Machined flat surfaces for easy mounting and integration into virtually any system.
• Small form factor, 6mm aperture, 1.050” (26.67mm) overall diameter and only .190” (4.8mm) thick.
• Reflective blades available for high energy light sources.
• Alternate blade material can be made available by special order (i.e. x-ray or other unique customer applications).
• Low voltage/current operation.
• Frequency operation can exceed 80Hz.
• Terminated to a 2-pin JST connector (S2B-PH-SM4-TB) via a 4 inch flex interconnect.
Electrical
COIL RESISTANCE
PULSE VOLTAGE
HOLD VOLTAGE
8 OHMS
10.7 VDC
Not Required
Mechanical
SERIES
WEIGHT
OPERATING
TEMP IN
DEGREES
MAX. OPENING
BOUNCE
MAX. CLOSING
BOUNCE
MAX
FREQUENCY OF
OPERATION
(CONT/BURST)1
NUMBER
SHUTTER
BLADES