CS65 Shutter Series0 pages
CS65 65mm Uni-stable Shutters
OVERVIEW
The CS65 is the second release in the new UNIBLITZ® CSseries. The small form factor allows a 65 mm aperture to
beinstalled into applications not presently accessible withexisting UNIBLITZ VS series shutters. As with the CS45,the
CS65 has been designed to provide accurate,repeatable exposures for a wide variety of applications.The small form
factor allows a 65 mm aperture to beinstalled into a five-inch diameter housing – about the sameoverall size as the
existing VS35 shutter! To increase theunit’s flexibility, the shutter can be supplied in an un-housedversion for OEM
applications or in situations inaccessible tomost shutters due to spatial limitations.
The CS65, along with its state-of-the-art patented dampingsystem, provides increased reliability over other designs
ofits type. In addition, the system provides the reliableactuator system found in all other UNIBLITZ shutter
designsallowing it to be driven with our existing VCM/VMM driveunits. As an option, the shutter can be equipped
theelectronic synchronization system.
When gating high intensity light sources, the CS65 can beequipped with polished stainless steel reflective blades.This
option protects the shutter blades from the lightsource’s damaging effects by reflecting the energy awayfrom the blade
surface. Look for future availability of “Z”(AlSiO) and “ZM” (AlMgF2) coated blades in this device.To further enhance the
flexibility of the CS65; an optional#102 mounting ring is available to allow the shutter to beeasily mounted in many nonspecific applications.Additional information regarding the #102 mounting ring canbe found in the specific data sheets
entitled“MICROSCOPE, VIDEO and UNIVERSAL MOUNTINGSYSTEMS”.
FEATURES
• Small form factor, a 65 mm aperture fits into a 5-inch diameter housing!
• Multi-bladed design in combination with the UNIBLITZ® actuator provide increased speed over other designs of this
type.
• State of the art patented damping system for increased reliability and speed.
• Minimum exposure time exceeds that of the VS65!
• Reflective blades available for laser and non-coherent light sources, "S", "Z" and "ZM" Type.
• Can be driven with our existing VCM/VMM drive units. Special driver not required.
• Available housed or un-housed for OEM applications.
• #102 Mounting Ring available for universal mounting applications.
• Electronic Synchronization System option available.
• Exposure repetition rates from DC to 5 Hz.
• Design, accuracy, and reliability that you have come to know as with all other UNIBLITZ® products!
• Can be configured normally open.
Electrical
COIL RESISTANCE
HOLD VOLTAGE 1 (NOMINAL)
12 OHMS
1
PULSE VOLTAGE TO OPEN
+70 VDC
+7 VDC / +5 VDC2
Voltage level required across actuator coil when being held in the open position.
"