Novibra® AV Plate0 pages
Novibra® AV Plate
Features
The AV Plate, made of oil and grease resistant rubber
material, is available either as a single (4.5 mm) or as a
double (8 mm) version.
The single version has ribs on one side only, while the double
has ribs on both sides applied at a 90 degree angle to each
other.
Good performance is obtained when using the Novibra AV
Plate in the building and construction industry as support
pads between flooring and joists. This application provides
for cushioning of loads and isolation of high frequency
vibrations within the building.
®
type AV Plate
The Anti-Vibration Plate is intended, primarily, for
applications with low requirement for vibration isolation.
Typical installations are machinery generating vibrations
in the high frequency range, and tall unstable
installations, requiring secure attachments to the
foundation. If insufficient deflection is achieved with a
single layer, multiple layers can be used by separating
each layer with a weight distributing steel plate.
In order to avoid direct contact between machine and
foundation, a rubber bushing (e.g. rubber hose) should be
installed in the mounting holes prior to installation of bolt
and rubber washer.
Pleases see “Mounting instructions” on this page.
Suitable applications are:
Pillar drills
Transformers
Large pumps
Industrial fans
Printing presses
Textile machinery
Large forging presses
Horizontal drill presses
H
H
Type
Drawing no.
Part no.
Single Plate
Double Plate
AV Double Plate
AV Double Plate
15-4039
15-4038
15-4057
15-4080
10-00019
10-00020
20-01798
20-01667
62
Dimensions in mm
L*B
600*500
600*500
500*500
500*500
Height
H (mm)
M-Max Load
(Kg/cm²)
Weight
(Kg)
4,5
8
8
10
5
5
5
5
1,21
1,82
1,51
1,89