Flow Cells & Cup Horn0 pages
HIGH INTENSITY CUP HORNS
The cup horns can process samples in isolation without probe intrusion, precluding any possibilities of cross-contamination
or aerosolization. Especially useful when working with infectious materials.
Typical applications include: cell disruption, liposome preparation, protein shearing, and
releasing cellular components including DNA and RNA.
The water-filled cup horn is screwed into the inverted converter in place of the probe. The
test tube(s) containing the sample(s) is(are) placed inside the cup horn. The vibrations produced in the cup induce cavitation inside the tube(s). Inlet and outlet ports enable cooling
water to be circulated within the cup, inhibiting heat build-up during extended operation.
Ease of disassembly facilitates cleaning, and in contrast to polycarbonate cup horns with
removable plastic fittings, these cup horns are 100% leakproof. The probe is fabricated from
titanium alloy Ti-6Al-4V and is autoclavable. Supplied with floating microtube holder Part
No. 830-00238 to enable 8 samples to be processed simultaneously, and splash shield.
(Microtube holder is not available with Part No. 630-0503.)
WATER OUTLET
Note: Because the intensity of cavitation within the test tube(s) is substantially less than with
direct probe contact, to obtain comparable results when using the cup horn, multiply the
processing time by 4. Connecting a booster Part No. BHNVC21 between the cup horn and
the converter, will double the intensity of cavitation within the cup.*
HIGH INTENSITY CUP HORNS**
PART
NO.
OUTSIDE
DIAMETER
INSIDE
DIAMETER
PROBE
DIAMETER
5" (127 mm)
2" (51 mm)
11⁄2" (38 mm)
11⁄4" (32 mm)
6" (152 mm)
3" (76 mm)
23⁄4" (70 mm)
2" (51 mm)
61⁄2" (165 mm)
630-0503
630-0431
OVERALL
HEIGHT
311⁄32" (85 mm)
3" (76 mm)
21⁄2" (64 mm)
CUP
COMPOSITION
Glass
630-0496
*When using a booster, always increase the power supply amplitude gradually to inhibit stalling.
**Connecting stud 1⁄2 - 20. Available on special order with 3⁄8 - 24 stud to enable connection to a 20 kHz converter manufactured by another company.
Upper outlet port accommodates 0.5" (13 mm) inside diameter tubing.
Bottom inlet port accommodates 0.4" (10 mm) inside diameter tubing.
FLOATING MICROTUBE HOLDER
The plastic microtube holder conveniently suspends 8 microtubes inside the 23⁄4" (70 mm) and
3" (76 mm) cup horn. Holder floats and keeps tubes immersed at a constant depth regardless of
the fluctuation in water level. Pressure plate holds tubes firmly in place and keeps tube caps
closed. Autoclavable. Microtubes not included.
Part No. 830-00238
MEDIUM VOLUME CONTINUOUS FLOW CELL*
The stainless steel continuous flow cell enables closed system operation and ensures safe processing
when working with infectious materials. The flow cell screws onto the threaded portion of the 1⁄2" (13
mm) probe at the nodal point. Recommended for the treatment of low viscosity samples, which do
not require prolonged exposure to ultrasonics. Designed primarily for dispersing and homogenizing
one or two dissimilar materials simultaneously at rates up to 20 liters/hour. Suitable for pressures up
to 40 psi (276 kPa/3 bar). Volume of liquid in chamber with probe in place: 65 ml. Fitting accepts
5
⁄16" (8 mm) ID tubing. Stainless steel. Autoclavable.
Part No. 630-0495
INLET
INLET
Note: For most applications the sample should be fed through the lower side port and collected at
the bottom port. However it is recommended that for cell disruption, the flow be reversed. Use both
inlets when processing two different materials simultaneously.
*Must be used with the 1/2” (13 mm) probe Part No. 630-0227.
SONICS & MATERIALS, INC., 53 CHURCH HILL ROAD, NEWTOWN, CT 06470-1614 USA
OUTLET
1-800-745-1105
"