Catalog MSO series0 pages
MSO
Rectangular boardmount
connectors to mate with
MSM cable connectors
Description
The MSO series, derived from the MSM
series, is for straight or right-angled
application on a printed circuit board.
Pre-assembled MSO connectors with pin
or socket N(16 contacts are intermateable
with the existing MSM rectangular cable
connectors.
The N° 16 TRIM TRIO .0625” (1.6mm)
diameter contacts are available in either
solid machined or stamped and formed
versions.
The polarizing hardware can be delivered in
either guiding or jackscrew versions.
Features and benefits
• Connectors supplied pre-assembled with
dip solder contacts.
• Contacts available in solid machined or
stamped and formed version.
• Available in 9-18-34-50-75 positions.
• For right-angled versions, there is a choice
of 9-18 and 34 contact positions.
• 34 contact positions suitable for V.35
applications (see section V.35)
• Polarising hardware prevent mismating.
• UL94-V0 rated thermoplast.
Construction
Intermateability
Connector Material : Glass filled polysulfone
Flammability rating : UL94-V0
Polarizing hardware: Brass nickel plated
Contacts: High conductive copper alloy
• “MSO” with pre-assembled contacts are
intermateable with the “MSM” rectangular
cable connectors equipped with TRIM
TRIO crimp-type removable snap-lock
contacts.
Plating table
Performance characteristics
Operating
temperature: -55°C to +1
25°C
Current rating: 5 Amp for stamped contacts
7.5 Amp for machined
contacts
Contact
resistance:
ͨ 3 mΩ
Insulation
resistance:
5000 M min.
Test potential: 2000 VAC
Durability:
500 matings and unmatings.
Plating for solid machined contacts:
No digit (std) = Min. 0.4 µ Gold all over,
over Nickel.
T = 3 - 5µ Tin all over
Plating for Stamped and formed contacts :
K9 (std) = Min. 0.4µ Gold in contact area,
3 - 5µ SnPb on solder tail.
T = 3 - 5µ Tin all over
How to order
Connector family
MSO
Contact arrangement
N° 1 contacts
6
Type of housing
P:
R:
Plug body with male contacts
Receptacle body with female contacts
Contact termination
K:
G:
straight dipsolder
Right angle dipsolder
Type of hardware
1:
58:
Guide pin and socket
Threaded jackscrew pin and socket
Design variation
E1: Solid machined contacts
SE1: stamped and formed contacts
Plating indication
61
34
M
R
G
58
SE1
K9
"