GL Filter Series ? Element Type ZL0 pages
Product - Specification
nnnnGL Filter Series - Element Type ZL
nnnnBrief Description
nnnnParker Zander, High-performance GL-
nnnnseries filters, containing ZL grade filter
nnnnelements are designed as depth-filters
nnnnfor the reliable remove of 1 |jm solid
nnnnparticulate and exhibit a filtration per-
nnnnformance of 99,925% in compressed
nnnnair or compressed nitrogen gas.
nnnnInnovative filter housing and filter ele-
nnnnment design leads to optimum flow
nnnncharacteristics at minimum pressure
nnnndrops: This results in cost savings
nnnnthroughout the operating lifetime of the
nnnnfilter element at reliable levels of filtra-
nnnntion performance.
nnnnHighly-efficient, borosilicate nano-fibre
nnnnmedia with a voids volume of 96%
nnnnensures high dirt-holding capacity at
nnnnconstantly low differential pressure. This
nnnnefficiency is additionally supported by
nnnndeep-pleating technology enabling 4.5
nnnntimes more effective filtration surface
nnnnarea when compared with conventional
nnnnfilter elements.
nnnnThe light-weight, compact construction,
nnnnensures a requirement for minimum
nnnnclearance below the filter bowl for ele-
nnnnment removal. The simple method of
nnnninstalling the filter element into the filter
nnnnbowl, in conjunction with a secure, air-
nnnntight housing closure avoids installation
nnnnerrors and prevents by-pass between
nnnnthe contaminated and clean enclosures.
nnnnThe inlet-port is clearly marked by an
nnnnaluminium feature above and below the
nnnnopening signifying the correct direction
nnnnof flow through the filter element.
nnnnPerformance overview:
nnnnModel | Port Size1 | Nominal2 | Element |
GL2ZL | 1/4 | 36 | CP1008ZL |
GL3ZL | 3/8 | 55 | CP2010ZL |
GL5ZL | 1/2 | 72 | CP2010ZL |
GL7ZL | 3/4 | 108 | CP2020ZL |
GL9ZL | 1 | 216 | CP3025ZL |
GL11ZL | 1 1/2 | 396 | CP3040ZL |
GL12ZL | 1 1/2 | 576 | CP4040ZL |
GL13ZL | 2 | 792 | CP4050ZL |
GL14ZL | 2 1/2 | 1188 | CP4065ZL |
GL17ZL | 2 1/2 | 1548 | CP5065ZL |
GL19ZL | 3 | 2232 | CP5080ZL |
1: Port size as per DIN ISO
nnnn228 (BSP-P) or ANSI B 1.20.1
nnnn(NPT-F)
nnnn2: Flow rates in m3/h related to
nnnn1 bara and 20 °C, compressed
nnnnto 7 bar. Where the minimum
nnnne
nnnnoperating pressure deviates,
nnnnthe actual flow rate must be
nnnnmultiplied with the respective
nnnncorrection factor f (see the
nnnnrespective table) to determine
nnnnthe required nominal flow rate
nnnnand the appropriately required
nnnnfilter model.
nnnnScope of supply:
nnnnReady-to-install filter, complete with filter element and float drain ZK15NO/KN;
nnnnwith optional differential pressure gauge ZD90GL and/or manual drain HV15.
nnnnOptionally available without a drain (in this case, not ready-to-install).
nnnnParker
nnnnI
nnnnZander
nnnnENGINEERING YOUR SUCCESS.
"