30 mm Mount E-Stop Buttons0 pages
30 mm Mount
E-Stop Buttons
Innovation for increased
safety and productivity
When 30 mm mount E-Stop buttons are wired in series,
the built-in logic function allows for clear indication of
which device has been pushed.
30 mm mount E-Stop buttons with an OTB optical touch
button is a simplified operator station that does not require
an enclosure.
Armed, actuated and stop status conveyed by
highly visible illumination with simple installation
Banner’s round, 30 mm mount E-Stop buttons are ideal for many emergency stop safety applications with
bright, highly visible indication. The easy to install E-Stops are available with two-color yellow and red lighting,
red lighting only, or a non-illuminated black base. EZ-LIGHT™ logic provides an illuminated yellow base when
the button is armed and the machine is enabled to RUN or is running, and turns to a flashing red indication
whenever the button is pushed. The base of an armed button can also turn to a steady red indication (from
yellow) when a STOP condition exists by applying an external signal.
▶
E
asy installation and hookup with no assembly,
individual wiring or additional enclosure required
▶
S
afe Break Action ensures NC contacts will open if
the contact block is separated from the actuator
▶
R
educes intensive labor costs with a fully enclosed
E-Stop button ready for installation
▶
M
odels available to interface with Safety BUS
nodes/gateways
▶
I
lluminated models with yellow and red (flash)
indication of actuation (armed or depressed/latched
button) and machine status (solid red - optional)
allows for easy identification of an actuated button
▶
M
ultiple buttons can be interfaced and series
connected with CSS Series Hookup Cordsets
▶
P
ush-to-stop, twist-to-release or pull-to-release
operation per IEC60947-5-5
▶
L
atching design complies with ISO 13850; direct
(positive) opening operation per IEC 60947-5-1
▶
C
ompliant with ANSI B11.19, ANSI NFPA79, and
IEC/EN 60204-1 Emergency Stop requirements
▶
“
Emergency Stop” legend included
▶
▶
N
on-illuminated models with various contact
configurations such as 2 NC, 1 NC/1 NO and
2 NC/2 NO; illuminated models with 2 NC and
a PNP NO auxiliary output
R
ugged design rated to IP65 with a 30 mm
mounting base
bannerengineering.com
30 mm mount E-Stop buttons can be surface mounted
without a bracket for machine mount applications.
45-plus years of sensor design experience, quality
control, sales support and cost-effective solutions:
▶ Banner
quality products with global availability
▶ apid
R
customization with most products shipping in 3
days or less
▶
Industry’s
largest force of application engineers to solve
your toughest challenges
▶
More
than 3,000 factory and local field representatives to
serve you
www.bannerengineering.com
1.888.373.6767
"