woven Bontec SG0 pages
A TOTAL RANGE OF GEOTEXTILES
Bontec SG woven geotextiles are manufactured from polypropylene tapes &
yarns, and exhibit an excellent chemical resistance to commonly encountered
acids and alkalis at ambient temperatures. Available in a lightweight range with
products from 80 to 200g/m2, and a heavyweight range from 200 to 800g/m2.
Bontec SG facts include:
Tensile strengths up to 300 kN per metre (kN/m) width
CBR Puncture Strengths ranging from 1.800 N to 12.500 N
SG Mechanical Properties that offer maximum strength at minimal cost
and ensure the products survivability both against installation damage
and in the longer term.
Lightweight woven geotextiles typically offer greater mechanical strengths
per unit weight than comparable nonwoven grades. This makes lightweight
woven geotextiles the ideal choice for separation
Waterflows normal to the plane that are generally several times more than
that required by design
A range of consistent opening sizes suited for use in soils ranging from clay
to coarse granular fill.
SG hydraulic properties that are suited to the demands of everyday
separators.
Available ex-stock in 4.5m and 5.25m wide rolls or other widths to order
Typical applications for SG woven geotextiles include:
As a general purpose separator for use under site access roads and areas
of hardstanding.
As a separation and strengthening layer under new roadways, car parks,
industrial units etc.
As an erosion control layer under heavy rock armour in coastal defence projects.
For any separation application where there exists a need to prevent the
intermixing of soft foundation soils with good clean granular fill.
SG Woven Geotextiles have been manufactured as a cost effective solution to your
soil separation and stabilisation applications. They are manufactured from highly
durable polypropylene polymer and have a long life expectancy when used in
permanent structures.
For further product information, be it a technical data sheet or to discuss your
project with one of our in-house geotextile experts please do not hesitate to contact
one of our offices listed below.
S G Wo v e n G e o t ex t i l e s
“An exciting range of Standard Grade geotextiles that offer the perfect solution to
your Separation requirements. With tensile strengths ranging from 10 to 300 kN/m
you can be certain that an SG fabric will be available with the performance that you
are looking for.”
DAILY SEPARATION, SOIL STRENGTHENING
OR GROUND REINFORCEMENT?
PRODUCT PROFILE
we undercover the world
2
0
5
10
15
20
25
30
35
40
45
0 50 100 150 200 250 300
TENSILE STRENGTH (kN/m)
WEIGHT (gr / m )
Woven
Nonwoven
Headquarters:
BONAR TECHNICAL FABRICS NV/SA
Industriestraat 39
B-9240 Zele
BELGIUM
T.: +32 (0) 52 457 487
F.: + 32 (0) 52 457 495
E-MAIL: geotextiles@bonartf.com
website: www.bonartf.com
BONAR YARNS & FABRICS Ltd
St. Salvador Street
Dundee Scotland
DD3 7EU
T.: +44 (0)1382 346102
F.: +44 (0)1382 229238
E-MAIL: geotextiles@bonaryarns.com
For UK and Ireland:
R E I N F O R C E M E N T
Other geotextiles available
within the Bontec range include
Highflow, High strength Wovens
and Thermally Bonded &
Needlepunched Nonwovens
Visit us at our website:
www.bonartf.com
Headquarters: BONAR TECHNICAL FABRICS NV/SA
Industriestraat 39 | B-9240 Zele | BELGIUM
T.: +32 (0) 52 457 487 | F.: + 32 (0) 52 457 495
E-MAIL: geotextiles@bonartf.com
For UK and Ireland: BONAR YARNS & FABRICS Ltd
St. Salvador Street | Dundee | Scotland | DD3 7EU
T.: +44 (0)1382 346102 | F.: +44 (0)1382 229238
E-MAIL: geotextiles@bonaryarns.com
SG WOVEN GEOTEXTILES
S E PA R AT I O N