15H High Pressure Direct Mounting0 pages
Model: 15H
nnnnSMALL DIAL - HIGH PRESSURE
nnnnINDUSTRIAL SERVICE GAUGE
nnnnThe model 15H is manufactured to meet the demand for small
nnnnhigh quality gauges designed for applications using gases,
nnnnwater or any liquid that does not attack brass and bronze.
nnnnThe one piece polycarbonate case with Integral window forms a
nnnnsolid baffle In front of the Bourdon tube and Incorporates a full
nnnndiameter stainless steel blow-out back so that In the event of a
nnnntube failure through corrosion, explosion or gross over pressure
nnnnany vapour or debris Is vented from the back of the case.
nnnnThis gauge Is designed for direct mounting on to the process
nnnnpipe work and comes with a grey Inner sleeve to give a grey
nnnncolour to the side of the case.
nnnnFor oxygen applications these gauges must be manufactured to
nnnnensure they are entirely free from oil and grease.
nnnnSize
nnnn63 mm & 80mm Dial diameter
nnnnMounting
nnnnDirect
nnnnCase & Bezel
nnnnOne Piece Polycarbonate, Safety Pattern case
nnnnScale Ranges
nnnn0 to 1 Bar, up to 600 Bar Pressure
nnnnEquivalent units of pressure / vacuum available
nnnnSingle and dual scales are available
nnnnPressure Element
nnnn316 Stainless Steel helical coll brazed to the body and with
nnnnwelded end piece
nnnnOverload
nnnnPressure Connection
nnnn1/4" BSP as Standard
nnnn1/8", 1/4" &3/8" BSP & NPT are also available
nnnnAccuracy Class
nnnnCL:1 1.0% of FSD as defined In EN837-1
nnnnTemperature
nnnnOperating: -20 to +90 °C
nnnnStorage: -40 up to +100 °C
nnnnOptions: for lower or higher operating temperatures, please
nnnncontact our Sales Office
nnnnTemperature Effect
nnnnVariation In Indication caused by temperature shall not exceed
nnnn± 0.04 X (t2 -11 )% of the span where:
nnnnt1 Is the reference ambient temperature In degrees Celsius
nnnnt2 Is the ambient temperature In degrees Celsius
nnnnHBudenberg
nnnnDial
nnnnWhite Anodlsed Aluminium marked In black finish
nnnnOption: Dual scale, colour bands & sectors
nnnnCustomisation with Company Name & Logo also available
nnnnPointer
nnnnStainless steel coloured black
nnnnMovement
nnnnBrass Construction
nnnnOption : Viscous Damped movement to overcome the effects
nnnnof minor pressure pulsations and vibrations
nnnnWindow
nnnnOne Piece Polycarbonate
nnnnEnvironmental Rating
nnnnIP54 as defined In EN 60 529
nnnnTraceability
nnnnAll Instruments are Individually calibrated and have an unique
nnnnSerial Number printed on the dial. A Certificate of Conformity
nnnnTraceable to National Standards Is Supplied Free of Charge
nnnnCertification available
nnnnBS EN 10204 3.1 B Material Certification
nnnnPoint by Point Test Certificate
nnnnSafety
nnnnAll units are manufactured to comply with EN 837-1, S3
nnnnspecification and other regulatory standards Including PED.
nnnnInstallation instructions
nnnnRefer to EN 837-2
nnnnRev-02 April 2006
nnnnDesigned and Manufactured In UK.
nnnnDatasheet BUD-003
"