IP Module Carrier > VIPC-6400B0 pages

VME

QUAD

I

NDUSTRY

P

ACK MODULE

C

ARRIER

Features

Four IP Module slots supported VME bus interface 8 MHz mode support IP Module I/Os available on front panel One IP Module slot I/Os available for rear VME connecion >

VIPC-6400

Flexible I/O is a passive VME IP Module carrier, with four expansion slots. This carrier board facilitate a modular approach to system assembly by extending peripheral capability with IndustryPack concept. The four IP module I/Os are available on four half-pitch 50-pin shielded connectors located on the front panel. The IP Module slot D supports rear VME I/Os connection. VME interface Power supply The VIPC-6400 board has a VME slave interface supporting A32/A24/A16/D16/D8(EO) with an interrupter (requester) D8(O). Individual EMC filter is provided for each on-board supply voltage introduced for accurate analog modules. A floating ground layer underneath IP slot enhances system noise reduction for sensitive applications. All power supplies are fuse protected by using thermal devices, which ensure an easier product maintenance. IP Module interface Four simultaneous IP Module slot are supported with 8 MHz mode bus. This interface supports the IndustryPack specification for 8 and/or 16-bit data for the available memory spaces (ID, IO, MEM, INT) . Up to 8 interrupts request are available for VME interrupt. Wide range of IP Modules The VIPC-6400 is compatible with hundred of IP Module products available from ACTIS Computer and third-parties. Typical applications cover industrial I/Os, serial communication controllers, acquisition system, etc. >

www.actis-computer.com