Made-to-Order T-Bolt Band Clamps0 pages

T-BOLT BAND CLAMPS
Made-to-Order
Clampco has manufactured thousands of
different clamp styles. Every style reflects a
different application requirement. For example,
some T-Bolt Clamps are manufactured with
permanent latches and heavier gauge stainless
steel for tough applications. Others are made
with quick release latches for ease of assembly
and disassembly. With a wide range of standard
latches, hardware, and bands, Clampco can
meet the most complicated and demanding
clamp requirements.
Our catalog will walk you through the process of
determining the right clamp for your application.
When your description code matches that of
a stock number, Clampco can sell right from
inventory. When the description code is unique,
we will manufacture the part for you.

How to Determine your
T-Bolt Band Clamp
Description Code
Clampco’s description code contains
5 segments, each representing a
different part of the clamp.

CLAMPCO LATCH STYLES
T-BOLT LATCH
The Clampco T-bolt latch is used for permanent or semipermanent applications and/or safety on pressurized
systems. The T-bolt latch is our most economical latch.

QUICK RELEASE LATCH

Below is a sample description code:

The Clampco quick release latch is used for ease of
disassembly and is required where the ability to replace
bolts is desired.

C410-C-75-450-S

SADDLE QUICK RELEASE LATCH

It’s easy to create your made-to-order
T-Bolt Band Clamp description code, just
follow these 5 easy steps:

The saddle quick release latch is also used for ease
of disassembly and where the ability to replace bolts is
desired. It is not recommended for diameters larger than
10 in. [254 mm] due to trunnion/band interference.

1. Determine Latch Style Code

C410 -C-75-450-S
2. Determine Bolt Code

C410-C -75-450-S
3. Determine Band Width Code

C410-C-75 -450-S
4. Determine Band Diameter Code

C410-C-75-450 -S
5. Determine Nut, Knob, or
T-Handle Code

C410-C-75-450-S

LIGHT-DUTY OVER CENTER LATCH
The light-duty over center latch is used on applications
that require frequent assembly or disassembly. No tools
are required for opening and closing the clamp after
initial installation. This latch style is ideal for light-duty
applications on small diameters and requires a 3⁄16 in.
diameter T-bolt.
(Note: Not recommended for pressurized applications)

MEDIUM-DUTY OVER CENTER LATCH
The medium-duty over center latch is well suited for
heavier applications and on larger diameters. No tools
are required for opening and closing the clamp after
initial installation. It is available with either a 1⁄4 in. or
5
⁄16 in. diameter T-bolt.
(Note: Not recommended for pressurized applications)

HEAVY-DUTY OVER CENTER LATCH
The heavy-duty over center latch is well suited for
heavy-duty applications and large diameters. It is
available with a 3⁄8 in. diameter T-bolt.
(Note: Not recommended for pressurized applications)

4

CLAMPCO PRODUCTS, INC.

330.336.8857

www.CLAMPCO.com