Pegasus0 pages
Pegasus
Description: The Pegasus drill is a compact ITH drill
unitized with an on board booster mounted on a
mobile center articulated carrier. Due to reduced
power requirements associated with its hydrostatic
drive, this drill is the most compact in its class.
Performance: The Pegasus drill can be used to drill
from 3 5/8” (92 mm) to 8.5” (216 mm) diameter holes
to a depth greater than 330’ (100 m) down hole. The
Pegasus is also able to be fitted for 30” reaming with a
V-30 attachment.
Accra Feed and ERIS panel
The inclusion of Accra Feed on Cubex underground
drills has increased overall drill performance by
providing optimal pressure to the bit in all rock
conditions. Lost drill string situations are reduced and
overall hole integrity is improved.
All the hydraulic control functions are electric/
hydraulic controlled through the CAN-BUS controller/
computer and programmable modules – this provides
more robust mechanical connections in the wiring
harnesses.
The Cubex ERIS system is set up so that mine managers
and engineers are able access the benefits of an
expandable control platform. This unit has proven
to be very reliable, while providing a high degree of
productivity.
Main Specifications
Carrier
Pegasus
Top Drive
6230
Mast
Standard Mast, Fixed Centralizer
Carousel
16 Drill Pipes (Up to 4” pipe)
Positioning System
Single Slideover
Control System
ERIS Panel
Powerpack
37 kW
Hammer Lubrication
AS-Pegasus
Air Booster
Reciprocating
Water Injection System
27 lpm (48 bar)
7 gal/min (700 psi)
Ground Clearance
230 mm
9”
Tramming Length
8.2 m
323”
Tramming Width
2.0 m
79”
Tramming Height
2.5 m
98”
Weight
22 700 kg
50 000 lb
7 kph
7 kph
4.3 mph
4.3 mph
1 kph
0.6 mph
Tramming Speed
Horizontal Only
Speed at 15% grade
Tramming Speed, Electric
Horizontal Only
Max Gradeability
50 HP
35%
Top Drive
Top Drive
6230
Max Working Pressure
207 bar
3 000 psi
Max Torque
5 730 Nm
4 225 lb.ft.
Rotation Speed
0-80 rpm
Patented Splined Piston Breakout System
403-29 R12 1210