LOADING
CPS 10B MKIII + EMB Bilge Water Separator0 pages
نسخه متنی
"
"
The bilge waters generated inside the new generation of ships, fast ferries, ferries, cruise vessels and warships, originated from the maintenance of turbines, engines and so on, show many difficulties for its separation in a classic bilge water separator due to the presence of water-oil emulsions. Anticipating the future, Facet International has developed a new Bilge Water Separator with the target of meeting the IMO MEPC.107(49). This Resolution requires that this type of equipment separate the bilge waters containing surfactant elements, in other words, emulsionated hydrocarbon waters with an effluent less than 15 ppm. HIGH DESIGN AND CONSTRUCTION TECHNOLOGY The combination of the classic, but highly experienced technology of Coalescent Plates used by the conventional generation of separators and the new generation of membranes has generated an innovative equipment with "stated-of-the-art design". This enabled to obtain a compact equipment with reduced dimensions, light weight, with easy and low maintenance. This equipment is totally automatic, and controls all functions through a PLC. CPS 10B MKIII+EMB is homologated for a flow rate of 2.5 m3/h (10 US GPM). Օ This Bilge Water Separators is supplied ready to install, coming complete with pumps, valves and control panel. With the exception of the pumps and pneumatic valves this Bilge Water Separator have no mobile components. The level control is fixed and has no float. Օ Maintenance requirements are very low, being restricted to occasional hosing down of the plate packs, and membrane cleaning. Access | for hot self-cleaning is extremely simple and easy to use. Separated hydrocarbon does normally contain less than 5% of water and this can be burned, if required. Օ Oil discharge is facilitated by connection to the ship's pressurized clear water system. The electrical power is at 380/440 v, 50 or 60 Hz. Օ This equipment does not required chemicals for cleaning RESULTS CPS 10B MKIII + EMB equipment remove hydrocarbons in two stages. In the first stage, free hydrocarbon is separated from water through FACET patented plate packs, in the second stage emulsions are broken by a membrane which removes emulsified hydrocarbon, reaching down an effluent with total hydrocarbon content of less than 5 ppm. ACCESSORIES The equipment is supplied with the following accessories: Bilge alarm: as latest IMO MEPC. 107(49) resolution. Օ Electric heater in the oil dome to facilitate heavy oil discharge (if it is required). CERTIFICATION AND OPERATIONAL EXPERIENCE Facet International CPS 10B MKIII + EMB has been tested, approved and certified according to the requirements ofIMO MEPC.107(49). Facet International's experience assures cost efficiency and working reliability. | ||||||||
www.facetinternational.net www.facetusa.com | |||||||||
© Facet International | |||||||||
a CL Al^COr? company |