Aeronaut Cam-Lock Tools0 pages
EmnjjiM.t&r- Ocm.ti-crU-iz.cL
nnnn[AERONAUTA Ttcrb-crtic. V Letter CuM^
nnnnTHE KEY TO Ì
nnnnYou would not think of buying a metal working
nnnnmachine tool with fixed tools, so why should
nnnnautomated cutters for fabric be fitted with fixed tools?
nnnnBecause 99% of the components for Aeronaut
nnnnmachines are manufactured in-house on state of the
nnnnart CNC machines, it is natural that we'd design this
nnnnsame versatility and flexibility into our automated
nnnncutters.
nnnnIn fact you'd think that it was so obvious that every
nnnnmanufacturer of automated cutters would do this...
nnnnbut oddly, they don't.
nnnnCam-lock tools fit from below the cutting head with a
nnnnsimple quarter turn of the Cam-lock fastener. They are
nnnnsecurely locked in position to give perfect indexing
nnnnof height, and more importantly, the precisely correct
nnnnblade angle, so you can fit any tool on any shaft and
nnnnget 100% cut accuracy every time without thinking.
nnnnTypically, tool changes take around 10 seconds. This
nnnnmeans you can change tools mid-job and quickly
nnnnremove tools from the machine to do blade changes.
nnnnAnother advantage of Cam-lock tools is that tools like
nnnndrill punches can be secured onto the same shaft so
nnnnSECURE FUTURE
nnnneven the simplest machines can punch holes with
nnnnnothing else to buy other than the Cam-lock drill
nnnnpunch itself.
nnnnAnd since all steered tool shafts are hollow, cutters
nnnnwith more than one steered axis can carry more than
nnnnone drill punch each with a solid rod ejector. Solid
nnnnrod ejectors push the punch wad out from the tool to
nnnngive you reliable punch holes every time, even in the
nnnnthick and resilient materials.
nnnnAnd while most competitive machines only have
nnnnthe power to carry a small 6mm punch, Aeronaut's
nnnnElektron cutters fitted with Cam-lock drill punch tools
nnnncan cut a full range of sizes up to 25mm.
nnnnAeronaut's Cam-lock tools are mounted on an
nnnnindustrial-strength 12 mm hardened steel shaft which
nnnnis rigidly mounted on widely spaced bearings to give
nnnnmaximum accuracy, freedom from backlash and
nnnnsurvive the roughest handling.
nnnnWith the wide range of Cam-lock tools currently
nnnnavailable and more in development, you can be sure
nnnnthat your cutter will tackle the toughest textiles, now
nnnnand into a secure future.
nnnnH€TRirnnuT HurmnnTiirn ~ 4-6 TEPKO ROAD TERREY HILLS NSW 2084 AUSTRALIA
nnnnPHONE (61-2) 9450 0800. FAX (61-2) 9450 0477 WWW.AERONAUT.ORG EMAIL INFO@AERONAUT.ORG
"