Saxon range0 pages

Saxon Range
1-8 Zone Conventional Control Panels
Key Features
♦
Built-in detector removal indication facility
♦
From 1 to 8 zones
♦
4 Alarm circuits on 4-8 zone panels
♦
Conforms to the requirements of EN54-2
♦
User-friendly access code
♦
One-man test facility
♦
Non-latching zone feature
♦
Class change input
♦
Earth fault monitoring
♦
Fully-functional repeater available (4 & 8
zone panels only)
♦
Removable cable-entry grommets
♦
User-friendly controls
♦
Surface or semi-flush mounting as standard
♦
Ample termination space
♦
Flame-resistant polycarbonate enclosure
♦
Log book and manual supplied
♦
Complies with EMC and LVD directives
Introduction
The Saxon Range conventional panel may be supplied in 1, 2, 4 or 8 zone formats. It complies with the requirements of EN54 Part 2.
All zones and alarm circuits are monitored for open and short circuit fault conditions with detector removal facility also
provided as standard.
The cabinet will house 2 x 12V 2.1AH S.L.A. batteries wired in series, which will sustain an 8 zone panel for up to 24 hours. All
panels have a zone 1 non-latch facility to enable panel interlinking without “lock-up” occurring. The class change input
enables the alarm circuits to operate without panel indication or panel latching.
The cabinet back-box houses only the transformer, thus providing a virtually empty enclosure for first fix installation. A steel
gland plate, removable plastic grommets and ample space are designed to assist with cable termination. A slide-in insert is
included for clear zone identification. The surface-mount electronics motherboard is fitted and terminated after first fix installation. Finally a terminal cover completes the panel installation.
The 4 & 8 zone panels will accommodate up to 3 repeater panels, which are connected by a shielded 2- core data cable
where the repeater panels are powered locally, or an additional 2-core may be run from the panel for power (Max. 1 repeater
may be powered from the panel).
From the UK's leading control panel manufacturer
FIREGUARD SAFETY EQUIP CO.LTD,2ND FLOOR, 145-157 ST.JOHN STREET, LONDON EC1V 4PY UNITED KINGDOM
Phone: +44 (0)8450 751042
Email: info@fireguard-uk.com
Fax: +44 (0)8450 751043
Website: www.fireguard-uk.com