Fisher® 10770 pages
1077 Handwheel Actuator
nnnnD101625X012
nnnnProduct Bulletin
nnnn61.8:1077
nnnnJuly 2012
nnnnFisher® 1077 Manual Handwheel
nnnnRotary Actuator
nnnnFisher 1077 manual-only handwheel actuator is for use
nnnnwith rotary-shaft valves such as the 9500 butterfly
nnnnvalve; 8532, 8560, and 8580 eccentric disc valves;
nnnnVI50, V200 and V300 Vee-Ball ™ valves; V250 valves;
nnnnand CV500 and V500 valves. Figure 1 shows the
nnnngearbox of the actuator. In this actuator, torque is
nnnntransmitted from the handwheel through the
nnnnhandwheel input shaft to a worm and drive sleeve gear
nnnn(sector) with splined bore. The worm and drive sleeve
nnnngear multiply the torque and transmit it to a splined
nnnnvalve shaft or splined stub shaft. The size 10-KE:6
nnnnactuator additionally has a spur gear reduction drive
nnnnfor increased torque capability.
nnnnW8176-1
nnnnFisher 1077 Handwheel Actuator
nnnnFeatures
nnnn■ Easy to Install and Maintain—Splined valve shaft
nnnnmates directly with the drive gear sleeve, reducing
nnnnthe number of parts required and simplifying
nnnninstallation and maintenance.
nnnn■ Easy to Operate—Handwheel rotation direction
nnnnrequired to open the valve disc or ball is marked on
nnnnthe handwheel; the rotation indicator is marked in
nnnnbold print at the open and closed positions and with
nnnnbold incremental lines to indicate the valve disc or
nnnnball position.
nnnn■ Consistency of Operation—When installed
nnnnaccording to instructions, clockwise handwheel
nnnnrotation closes the valve in all applications.
nnnn■ Accurate Valve Disc or Ball Positioning—Travel stops
nnnncan be adjusted and locked in place to provide
nnnnaccurate disc or ball positioning at closed
nnnn(0-degree) and open (90-degree) positions. Travel
nnnnstops for 60-degree operation may be used to
nnnnestablish a disc or ball closing stop at any angle
nnnnFigure 1. Gearbox Subassembly
nnnnbetween 0 and 30 degrees and/or to establish a disc or
nnnnball opening stop at any angle between 60 and 90
nnnndegrees. This option is available on sizes 2-KE and 7-KE
nnnnas a set screw change. For sizes 0-KE, 6-KE, 9-KE, and
nnnn10-KE:6, a different actuator is required when
nnnnchanging from 90-degree to 60-degree ball rotation.
nnnnFISHER
nnnnwww.Fisher.com
nnnnEMERSON
nnnnProcess Management
"