High Pressure Pumps Series NHK/SHK, 200 m³/h, 85 m, 130 °C0 pages
Hygienic centrifugal pump
Flooded suction and self-priming
Type NHK and SHK
TECHNICAL DATA
Output:
max. 200 m³/h
Head:
max. 85 m
Speed:
max. 3000 rpm or 1500 rpm
Material:
Stainless steel
Temperature:
max. 130 °C or 90 °C
Casing pressure:
PN 16
Shaft seal:
single or double mechanical seal
Connections:
threaded connection to DIN 11851
or flanged
Direction of rotation:
clockwise, viewed from drive end
flooded suction, type NHK
self-priming, type SHK
APPLICATION
CONSTRUCTION
Hygienic centrifugal pumps of the NHK and SHK range are used
within the food and beverage industry such as breweries and
Casing pressure:
dairies. Applications areas for these pumps include:
NHK 25:
max. 10 bar up to +130 °C
- Brewing (Mash, wort, beer)
NHK from 50:
max. 16 bar up to +130 °C
- Dairying (milk, cream, fats)
SHK:
max. 10 bar up to + 90 °C
- Filtration (Filtration, separation, mixing)
- Cleaning (Up & Downstream CIP)
- Filling (Beer, soft drinks, juices)
- Sterile and pure water
Flange location:
Axial suction, radially vertical discharge.
Connections:
Threaded connections to DIN 11851 or flanged.
Design
The single stage NHK is a hygienic volute-casing pump with open
impeller (for optimised pumping of shear sensitive media) rotating
on a robust shaft. The thick-walled stainless steel casing is fixed
Hydraulic:
Design code A for n = 1450 1/min
Design code B for n = 2900 1/min
by a sturdy quick-release clamp ring with sanitary grade O-ring
sealing. All process-wetted parts are constructed from electropolished AISI 316L stainless steel. Importantly, the volute casing
is rolled steel whilst the casing cover is forged in order to give a
heavy-duty construction. All other parts are made of AISI 304.
The SHK range is a single stage, self-priming, hygienic side
channel pump. All process-wetted parts are made of AISI 316L. All
other parts are made of AISI 304.
The NHK and SHK range are in accordance with food-grade
standards 3A1 with a surface roughness Ra ≤ 3,2 µm (other
Shaft sealing:
Shaft sealing can be either single or double mechanical seal.
Design code X0A: single mechanical seal, seal face materials
SiC/SiC, elastomer EPDM
Design code X0B: double mechanical seal, seal face materials
product side SiC/SiC, elastomer EPDM,
atmospheric side Cr-Steel/carbon, elastomer
EPDM
standards are optional). The Modular and compact design, the use
of standard motors and several options guarantee a reliable
performance within the food and beverage industry.
133.47301.51.01 E
PUMPTECHNOLOGY NHK and SHK
02/2005