14 Channel Configurable Power Management Integrated Circuit PF0100Z0 pages
Freescale Semiconductor
Advance Information
Document Number: MMPF0100Z
Rev. 8.0, 10/2015
14 Channel Configurable Power
Management Integrated Circuit
PF0100Z
Automotive
The SMARTMOS PF0100Z AEC Q100 Grade 2 Automotive Power
Management Integrated Circuit (PMIC) provides a highly programmable/
configurable architecture, with fully integrated power devices and minimal
external components. With up to six buck converters, six linear regulators, RTC
supply, and coin-cell charger, the PF0100Z can provide power for a complete
system, including applications processors, memory, and system peripherals, in
a wide range of applications. With on-chip One Time Programmable (OTP)
memory, the PF0100Z is available in pre-programmed standard versions, or
non-programmed to support custom programming. The PF0100Z is especially
suited to the i.MX 6 family of devices and is supported by full system level
reference designs, and pre-programmed versions of the device.
POWER MANAGEMENT
ES SUFFIX (WF-TYPE)
98ASA00379D
56 QFN 8X8
Features:
• Four to six buck converters, depending on configuration
• Single/ Dual phase/ parallel options
• DDR termination tracking mode option
• Boost regulator to 5.0 V output
• Six general purpose linear regulators
• Programmable output voltage, sequence, and timing
• OTP (One Time Programmable) memory for device configuration
• Coin cell charger and RTC supply
• DDR termination reference voltage
• Power control logic with processor interface and event detection
• I2C control
• Individually programmable ON, OFF, and Standby modes
PF0100Z
Applications:
•
•
•
•
•
GPS
Auto Infotainment
Heads Up Display (HUD)
Rear Displays
Digital Instrumentation Cluster (DIC)
i.MX 6X
VREFDDR
SW4
1000 mA
DDR MEMORY
INTERFACE
DDR Memory
SW3A/B
2500 mA
SW1A/B
2500 mA
Processor Core
Voltages
SW1C
2000 mA
SW2
2000 mA
SWBST
600 mA
SD-MMC/
NAND Mem.
SATA
HDD
SATA - FLASH
NAND - NOR
Interfaces
Control Signals
I2 C Communication
VGEN3
100 mA
VGEN4
350 mA
Camera
Camera
HDMI
LDVS Display
USB
Ethernet
CAN
VGEN6
200 mA
Main Supply
2.8 – 4.5 V
Sensors
GPS
MIPI
uPCIe
WAM
GPS
MIPI
VGEN5
100 mA
COINCELL
Audio
Codec
I2C Communication
VGEN2
250 mA
LICELL
Charger
External AMP
Microphones
Speakers
Parallel control/GPIOS
VGEN1
100 mA
Cluster/HUD
Front USB
POD
Rear Seat
Infotaiment
Figure 1. Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2014-2015. All rights reserved.
ES SUFFIX (WF-TYPE)
98ASA00589D
56 QFN 8X8
Rear USB
POD