TubeInspect P80 pages

NEW

TubeInspect P8
The new TubeInspect P8
Highly precise and versatile
The new benchmark in 3D
tube and wire measurement

Most of all bent tubes and wires are less than 1,000 mm long
from end to end and have a maximum diameter of 100 mm.
The first model of the new TubeInspect generation, the
TubeInspect P8, was especially developed for the efficient
quality control of this kind of component.

For 20 years, AICON’s optical tube measurement systems
have been standing for efficient quality control of bent tubes
and wires. Highly precise and fast measurement, programmable optical gauge, automated setup and correction of
bending machines, reverse engineering of sample tubes, initial
sample testing, automatic 100 % inspection – these are only
some of the various applications of this renowned technology.
The new TubeInspect P is the consistent further development
of this successful concept. It is the answer to the constantly
rising demand for tube measurement technology in manufacturing and to higher customer requirements regarding inspection of increasingly tighter tolerances.
Equipped with 8 high-resolution cameras, TubeInspect P8 is
suitable for tubes and wires with diameters from 1 mm to 125
mm and allows for optimum 3D inspection of objects of up to
1 m length. However, even longer objects can be measured
with TubeInspect P8. The lateral doors allow for an overlapping repositioning section by section.
Sheath tolerance can be determined to an accuracy of up
to 0.035 mm. Measuring results are provided within 2 to 5
seconds. Considerably optimized production processes, e.g.
the setup of bending machines, save time and costs. Combined with the software platform BendingStudio, the system
offers various application-oriented functionalities.