RP 5 T - RP 12 E - RP 30 D - RP 50 B0 pages

T es t ing m a c h i n e s

Non contractual pictures

RP 5 T – RP 12 E – RP 30 D – RP 50 B
C-Frame flexural testing machine
Standards: EN 12390-4

AUTOMATIC Flexural testing machine
Load 5 kN – 12 kN – 30 kN – 50 kN
The built of this user friendly C-Frame combines High quality
and heavy duty design.
After welding, our C-Frames are ground at the Jack fixation
plates and the test table to correct any misalignment induced
by welding !
Furthermore are all our flexural testing frames equipped with
double effect Jacks making the run back to the starting position
easier.

Ergonomics
Solidly united to a very rigid table, our C-frames offer
the operator, on top of a remarkable accessibility to the
specimen to be tested, very good user friendliness, allowing
him to put even heavy specimen into position without risking
hurting his back !
Furthermore does the working table offer hollow feet for easy
and safe handling during the setting up in the laboratory
with just a simple pallet jack.

Characteristics
• Welded C-Frame chassis
• Long stroke double effect jack (see chart) working
at 400 bar.
• Hydraulic stoke: 300 mm (or 350 mm)
• Jack mounted with a soft friction sealing and Teflon
guiding.
• Automatic run back after the test.
• Specific blades ans accessories for tiles, infillor blocks,
kerbstones, slabs etc…

RP 5 T Tiles
Max load
Tooling
Daylight
Stroke
Weight
Standard

RP 12 E
Infillor blocks

6 kN
12 kN
Ø 40 x 600
20 x 300
240 mm
240 mm
300 mm
300 mm
250 kg
300 kg
EN 490
EN 15037-2
Tooling for roof tiles, kerbs, flags, infillor blocks may be mounted on each frame

RP 30 D
Slabs

RP 50 B
Kerbstone

30 kN
Ø 40 x 650
240 mm
350 mm
420 kg
EN 1339

50 kN
Ø 40 x 600
240 mm
350 mm
500 kg
EN 1340