LOADING
SH Series 8 kW to 40 kW Regulated High Voltage DC Power Supplies0 pages
نسخه متنی
"
"
SH Series 8 kW to 40 kW Regulated High Voltage DC Power Supplies 1 kV to 100 kV Rack Mount CE and Semi S2-93 Compliant | | | |
Models from 0 to 1 kV through 0 to 100 kV 8kW models are 17.5"H x 24.0" D. Weight is only 110 lbs. | |||
Features: Arc Quench. The HV output is inhibited for a short period after each load arc to quickly extinguish the arc. Arc Sensing. Internal circuitry constantly senses and integrates arcs that occur over a given time. In the event a system or load arcing problem develops and exceeds factory-set parameters, the power supply will cycle off in an attempt to clear the fault and then automatically restart after a preset "off dwell time". Pulse-Width Modulation. Off-the-line pulse-width modulation provides high efficiency and a reduced parts count for improved reliability. Air Insulated. The SH Series features "air" as the primary dielectric medium. No oil or encapsulation is used to impede serviceability or increase weight. Constant Voltage/Constant Current Operation. Automatic crossover from constant-voltage to constant-current regulation provides protection against overloads, arcs, and short circuits. Current Trip. This feature may be substituted for constant-current operation by a rear panel selector switch. | Redundant Thermal Overload Protection. Thermo stats and tacho meter fan RPM sensing shut down the power supply due to over temperature or reduced fan speeds. Low Ripple. Typically, ripple is less than 0.025% rms of rated voltage at full load. Tight Regulation. Voltage regulation is typically better than 0.01% for allowable line and load variations. Current regulation is better than 0.1% from short circuit to rated voltage. Higher Power Capability. Power supply modules can be paralleled up to 40 kW output power utilizing one master control module and up to four slave modules. Differentially Coupled Analog Control Signals. All voltage and current programming and monitoring signals are coupled to the user interface by true differential amplifiers. This provides for the ability to return the program and monitor commons to ground or system common at the source. This arrangement isolates the return wires and eliminates errors due to unwanted return currents flowing in these connections. Warranty. Standard power supplies are warranted for three years; OEM and modified power supplies are warranted for one year. A formal warranty statement is available. | ||
The SH family of power supplies are sophisticated, 8 kW through 40 kW, high voltage power supplies with low ripple and noise. They are air insulated fast response units with tight regulation and extremely low arc discharge currents. Fully Compliant "With The European harmonized EMI directive and with the low voltage directive, 73/23/EEC. | |||
Designing Solutions for High Voltage Power Supply Applications GLASSMAN HIGH VOLTAGE INC 124 West Main Street, PO Box 317, High Bridge, NJ08829-0317 (908) 638-3800 Fax (908) 638-3700 Օ www.glassmanhv.com | |||
GLASSMAN EUROPE Limited (UK) GLASSMAN JAPAN High Voltage Limited +44 1256 883007 FAX +44 1256 883017 +81 45 902 9988 FAX +81 45 902 2268 E-mail: Glassman_europe@glassmanhv.com E-mail: Glassman_japan@glassmanhv.com | |||
© Glassman High Voltage, Inc. Printed in the U.SA C 9/8/2003 |