LOADING
EK Series 600W Regulated High Voltage DC Power Supplies0 pages
نسخه متنی
"
"
EK Series 600W Regulated High Voltage DC Power Supplies 1kV to 60 kV Rack Mount 3.5 Inch Panel Height... Laboratory Performance... CE and Semi S2-93 Compliant | | ||
Models from 0 to 1 kV through 0 to 60 kV 3.5" H x 20.5" D, 20 lbs. | |||
Features: Arc Quench. The HV output is inhibited for a short period after each load arc to help extinguish the arc. Arc Sensing. Internal circuitry constantly senses and integrates arcs that occur over a given time. In the event a system or load arcing problem develops and exceeds factory-set parameters, the power supply will cycle off in an attempt to clear the fault and then automatically restart after a preset "off dwell time". Pulse-Width Modulation. Off-the-line pulse-width modulation provides high efficiency and a reduced parts count for improved reliability. Low Ripple. Typically, ripple is less than 0.02% RMS of rated voltage at full load. Air Insulated. The EK Series features "air" as the primary dielectric medium. No oil or encapsulation is used to impede serviceability or increase weight. | Constant Voltage/Constant Current Operation. Automatic crossover from constant-voltage to constant-current regulation provides protection against overloads, arcs, and short circuits. Redundant Thermal Overload Protection. Thermostats and fan RPM sensing shut down the power supply due to over temperature or reduced fan speeds. Tight Regulation. Voltage regulation is better than 0.005% for allowable line and load variations. Current regulation is better than 0.1% from short circuit to rated voltage. Warranty. Standard power supplies are warranted for three years; OEM and modified power supplies are warranted for one year. A formal warranty statement is available. | ||
The EKfamily of power supplies are sophisticated, 600 watt high voltage power supplies with low ripple and noise. They are air insulated, fast response units, with tight regulation and extremely low arc discharge currents. The EK Series are fully compliant with the European Harmonized EMI Directive EN50082-2 and with the European Low Voltage (Safety) Directive, 73/23/EEC. | |||
ft | Designing Solutions for High Voltage Power Supply Applications GLASSMAN HIGH VOLTAGE INC 124 West Main Street, PO Box 317, High Bridge, NJ08829-0317 (908) 638-3800 Fax (908) 638-3700 Օ www.glassmanhv.com | ||
GLASSMAN EUROPE Limited (UK) GLASSMAN JAPAN High Voltage Limited +44 1256 883007 FAX +44 1256 883017 +81 45 902 9988 FAX +81 45 902 2268 E-mail: Glassman_europe@glassmanhv.com E-mail: Glassman_japan@glassmanhv.com | |||
© Glassman High Voltage, Inc. Printed in the USA B 10/22/2002 |