HL150M0 pages
HL150M Dri-Prime® Pump
The Godwin Dri-Prime HL150M pump offers
flow rates to 1650 USGPM and has the capability
of discharge pressures to 219 psi.
Picture7
The HL150M is able to automatically prime to
28' of suction lift from dry. Automatic or manual
starting/stopping available through integral
mounted control panel or optional wirelessremote access.
High discharge pressure, dry-running, and
portability make the HL150M the perfect choice
for mining, industrial and emergency fire
backup applications.
Features and Benefits
Simple maintenance normally limited to
checking fluid levels and filters.
Dri-Prime (continuously operated Venturi air
ejector priming device) requiring no periodic
adjustment or control. Optional automatic onoff control available on the priming system.
Dry-running high pressure liquid bath
mechanical seal with high abrasion resistant
solid silicon carbide faces.
Close-coupled centrifugal pump with DriPrime system coupled to a diesel engine or
electric motor.
6" 150# ANSI B16.5
6" 150# ANSI B16.5
1650 USGPM †
1.4"
15.2"
176°F*
219 psi
87 psi
329 psi
2400 rpm
* Please contact our office for applications in excess of 176°F.
† Larger diameter pipes may be required for maximum ows.
Also available in a critically silenced unit
which reduces noise levels to less than
70dBA at 30'.
Suction connection
Delivery connection
Max capacity
Max solids handling
Max Impeller diameter
Max operating temp
Max working pressure
Max suction pressure
Max casing pressure
Max operating speed
All cast iron construction (stainless steel
construction option available) with cast steel
impeller.
Specifications
Standard engine Caterpillar C7 (T3 Flex). Also
available with John Deere 6068HFC94 (IT4).
Picture 101
Please contact the factory or office for further details. A typical picture of the pump is shown.
All information is approximate and for general guidance only.