CHILLERS FOR INDUSTRIAL FLUIDS ?MEC?0 pages
CHILLERS FOR INDUSTRIAL FLUIDS
“MEC”
The new MEC series of self-contained chillers have been designed for the cooling of different
fluids such as glycol and water mix, hydraulic oils, cutting fluids for industrial applications.
The water chiller temperature range is from +5° t o +30°
C
C
The oil chiller temperature range is from +20° to 45°
C
C
All units are suitable for ambient temperatures up to 40°
C
The following versions are available for each single unit:
•
•
•
•
•
Version W, suitable for low viscosity fluids; it is equipped without pump and tank;
Version O, suitable for medium viscosity fluids; it is equipped without pump and tank ;
Version WP (for water) and Version OP (for oil) equipped with pump and without
tank; they are suitable for working in open or closed loop circuits which are complete
with tank (hydraulics, cutting oils, dielectric oil);
Version WVP, suitable only for water and low viscosity fluids; units are supplied with
tank and pump. They are suitable for working in closed loop circuits which do not provide a tank (high speed spindles, spot welding machines, laser);
Version EI, useful for cooling "dirty" fluids; It provides a cleanable evaporator and it is
complete with pump, supplied without tank.
The pump is selected according to the type of fluid to be cooled:
•
Peripheral or centrifugal pump for water, water and glycol mix, other fluid mix
•
Gear pump for high-medium viscosity fluids
The built-in tank of the WVP version is an open stainless steel one, easy to clean.
Each unit is selected, according to the type of fluid, with a different evaporator enabling the
highest machine performance and reliability:
•
Finned coil evaporator plunged into a tank, suitable for units cooling water, water and
glycol mix or low viscosity fluids
•
Stainless steel brazed plate evaporator used in chillers without tank for the cooling of
any clean fluids
•
Cleanable evaporator for “dirty” fluids.
MEC
SPECIAL VERSIONS:
•
•
Models with horizontal air outlet
(fan placed on the back side)
•
more than a nsw ers
Models for laser cooling
Higher performance pump
Green Box Srl - 35028 Piove di Sacco (Padova) - Italy -Via G-Galilei, 2 - Tel. +39 049 9703319 - Fax +39 049 9701968
www.greenbox.it - info@greenbox.it