153 Cable glands0 pages
Cable Glands
153/X
North American Cable Glands/Connectors
109
General Purpose
'G' Approx (Fully Compressed Length)
Nickel
Plated Hub
Braid 'C'
Application
Entry Thread Size
Size
NPT Standard
Ref.
Metric *
or Option
Os
O
A
B
C
C2
D
E
F
H
½"
½"
½" or ¾"
¾" or 1"
1" or 1¼"
1¼" or 1½"
2" or 1½"
2½" or 2"
3" or 2½"
3½" or 3"
M20²
M20²
M20
M25
M32
M40
M50
M63
M75
M90
Standard Seal
Min.
0.12"
0.30"
0.44"
0.52"
0.75"
0.99"
1.24"
1.68"
2.15"
2.64"
Ø 'B'
Entry Thread
Ø 'A'
• Outdoor or indoor use.
• For use with armoured marine shipboard jacketed or
non-jacketed cable.
• See technical section for installation rules and regulations.
CABLE GLAND SELECTION TABLE
Cable Acceptance Details
Alternative Seal (S) Outer Jacket ‘B’
Max.
0.31"
0.46"
0.56"
0.79"
1.04"
1.27"
1.74" / 1.67" ¹
2.21" / 2.14" ¹
2.67" / 2.57" ¹
3.06"
Min.
0.34"
0.38"
0.61"
0.87"
1.09"
1.54"
1.91"
-
Max.
0.52"
0.60"
0.83"
1.10"
1.37"
1.83"
2.29"
-
Min.
0.22"
0.37"
0.49"
0.66"
0.87"
1.10"
1.42"
1.81"
2.24"
2.96"
Max.
0.47"
0.63"
0.81"
1.02"
1.30"
1.61"
2.07"
2.57"
3.07"
3.52"
Hexagon Dimensions
'G'
Across
Flats
Across
Corners
2.04"
2.04"
2.08"
2.74"
2.52"
2.69"
3.11"
3.10"
3.29"
4.80"
0.94"
0.94"
1.18"
1.42"
1.81"
2.17"
2.56"
3.15"
3.74"
4.53"
1.04"
1.04"
1.28"
1.55"
1.98"
2.38"
2.78"
3.46"
4.09"
5.23"
Braid ‘C’
0.008" / 0.013"
0.008" / 0.013"
0.008" / 0.013"
0.008" / 0.013"
0.008" / 0.013"
0.008" / 0.013"
0.008" / 0.013"
0.008" / 0.013"
0.008" / 0.013"
0.008" / 0.013"
All dimensions in inches (except * where dimensions are in millimetres). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of
thread. For H size glands, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please
specify when ordering
¹ Smaller value is applicable when selecting reduced NPT entry option.
² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43”
³ UL approved only.
Technical Data
•
•
•
•
•
•
•
•
Features
UL Listed for use Wet Locations.
UL Listing No: E218332.
Construction and Test Standards: UL 514B.
Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days)
to IEC/EN 60529 and NEMA 4X.
Deluge Protection to DTS01.
Operating Temperature Range: -50°C to +60°C.
Assembly Instruction Sheet: AI 341.
Alternative certification options available:
DNV Marine Approval
ABS Marine Approval
• Provides armour clamping for marine shipboard cable.
• Provides a seal on the cables inner jacket.
• Provides an outer deluge seal to prevent moisture ingress to the
•
•
•
cable armour and enclosure. Deluge seal is coloured black to
indicate General Purpose product.
Provides a cable retention and low smoke and fume, zero
halogen seal onto the cables outer jacket.
Manufactured in Brass (standard), Nickel Plated Brass,
316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.
Ordering Information
Format for ordering is as follows: Alternate Clamping Ring (S), add suffix S to ordering information.
Cable Gland /
Connector Type
153
Size
Thread
(OPTIONAL)
CX
M32
S
Cable Gland /
Connector Type
153
Size
Thread
(OPTIONAL)
CX
1"NPT
S
Connection Solutions
HPG01
UPD 090610
www.ehawke.com