TAURUS III0 pages

Mining machines \ Special crane

-\ ~ TAURUS III

This crane was specially developed for mines and has

a loading capacity of 6.5tons and with a min. transport

height of 1.800mm. Itcan be flexible used in the mines

for different requirements, for example, with a special

adaptor arm it can be used for installation of conveyor

belts. Due to the 3 inflexions, the arm can be put on

the sole and can be telescopically extended to a lifting

height up to 9800mm. The rotation ring makes a rotation

range of 360° possible.

The vehicle is equipped with Deutz diesel motor

(125 kW), four wheel drive, four wheel steering and in oil

bath running multiple-plate brakes.

The crane vehicle can easily be operated with radio

control and can carry weights up to 1.5tons beside

or behind the frame of the vehicle, without a special

support.

TAURUS_TAURUS III

Drive_Diesel

Loading Capacity - kgs/C.G. 600mm 6.500

Lifting hight - mm_9.800

Length - mm_8.150

Width mm_2.600

Hight obove driver's cabin - mm_min. 1.800

Turning radius - mm_2.500

Type of steering_Dana

Engine performance - kW/hp_125_

Subject to changes without notice

OHERBST SMAG HERBSTSMAG Fon: +49(0)531-516887-0

J7. . j u | ■ Minin9 Technologies GmbH Fax: +49 (0) 531-516887-39

Mining Technologies Grotrian-Steinweg-Strasse 1a Mail: info@herbst-smag.de

D-38112 Braunschweig www.herbst-smag.de

HERBST SMAG is used to develop special vehicles for industry and mining machines for the strong use in surface and underground mining.