FSA(PE) Fluid Conditioning for Phosphate Ester0 pages
HY-PRO FILTRATION
FSA
Fluid Conditioning for Phosphate Ester
Ideal for Maintenance of Steam Turbine EHC Fire Resistant Fluids
Prevent contamination related servo valve failures,
extend useful oil life.
Remove & maintain Acid Number to < 0.09* with
ICB element technology.
Increase fluid resistivity.
Maintain H2O below 300 ppm with TMRN2 and
minimize acid producing hydrolysis.
Prevent & remove gels & deposit caused by
other acid removal technologies (ICB technology
removes dissolved metals).
Integrated TMRN2 (Nitrogen generator) prevents
airborne water & metal ion ingression, and
removes combustible dissolved gasses (reducing fluid
breakdown).
Particulate & insoluble gel / sludge removal with
high efficiency on-board filtration.
Fluid Compatibility
FSA systems are compatible with a range
of specified fire resistant fluids used in EHC
(Phosphate ester).
Suitable Operating Temperature Range
Fluid Condition Based Solutions
From a sample of in-service oil and system details we
will help you specify and implement a fluid contamination
solution to achieve reliable aero-derivative turbine operation.
Takeadvantage of over 30 years of EHC fire resistant fluid
maintenance experience. We know how.
90°F/32°C (minimum) to 160°F/71°C (maximum)
Operating below minimum can result in reduced acid
and metal ion removal efficiency
Warning: Do not operate above max temperature
160°F/71°C. Contact factory to add pre-cooler before
ICB media (operating temp required).
High Contamination Fluid Recovery
For systems with high acid number, excessive gel /
sludge buildup or extremely high watercontact
Hy-Pro for rapid fluid recovery solutions.
Specifications
Filter Assemblies: Epoxy coated steel (304 option)
Electrical Motor: 1 HP, TEFC
TMRN2 Air Consumption: 1.2 - 6.0 SCFM see sizing
guidelines
*Lowest possible acid number will normally range from >0.01 - <0.09.
In rare cases values will be higher when uncommon oil brands are
used.
www.hyprofiltration.com
"