Programmable Temperature Transmitter Series: TTH1040 pages

INDUMART Canada

Programmable Temperature Transmitter

www.indumart.com

SERIES: TTH104

RTD INPUT
2-WIRE CURRENT OUTPUT
VIBRATION-PROOF DESIGN
RS232 SERIAL INTERFACE FOR CONFIGURATION

INTRODUCTION

SPECIFICATIONS

Indumart TTH104 Series of Programmable
Temperature Transmitters provide accurate
and reproducible conversion of pt100 RTD
signal to 2-wire 4-20 mA output.

Measurement Range
-50...+200°C, programmable
Measurement Error
0.2% of span or 2°C
Nonlinearity for RTD
Within the error limit
Temperature Drift
0.01% of span for 1°C
Current Output Signal 4...20 mA or 20...4 mA
Maximum Load
800Ù @ 24V / 20mA
Power Supply
8...36 VDC
Output @ Sensor Break <3.9 mA or >20.2 mA
Programmable
Interface Type
RS232 with special cable*
Ambient Condition
-30...80°C; 0...95% RH
Case Material
Hard plastic
Protection
IP20
Dimensions
Ø44 x 19 mm
Weight
25 grams

Using the RS232 serial interface cable
along with the free-of-charge programming
software allows selections of the input
range, the output direction and the sensor
failure action by the user. Configuration is
fast and easy. However, the user may
specify the above parameters at the time of
ordering and receive the transmitter ready
for installation.
The TTH104 Series may be mounted on the
standard 33 mm fixing centers of miniature
RTD connection heads.

INDUMART

INC.

* The "CB1" cable must be ordered separately.

1-15 W. Pearce St., Richmond Hill, Ont. L4B 1H6, Canada
Phone: (905) 707-9998 Fax: (905) 707-8484 E-mail: Sales@Indumart.com