Trolley for GTE and GTP (600 / 1.000 / 1.200 / 1.600 kg)0 pages
Trolley for large load
carriers (LLC)
Suitable for all
Jungheinrich trailers
Available in several sizes
and load capacities
Trolley for GTE and GTP
(600/1,000/1,200/1,600 kg)
Trolleys are used to transport large load carriers (LLC) in a
tugger train, such as pallets or mesh boxes. In order to be able
to handle the large load carriers at the destination without the
use of additional equipment, it is possible to move the LLC
manually with the trolleys. The trolleys are perfectly matched to
the Jungheinrich GTE and GTP trailers.
The LLCs are placed on the trolleys, pushed into the trailers and
mechanically locked. During travel, the trolleys are raised by
the trailers, so that they do not run on their own wheels. This
principle has the following advantages:
•t Low roll resistance: The wheels of the trolleys have optimised
roll resistance due to the ball bearings and hard tread. When
pushed manually, therefore, only low forces are required.
•t Quiet operation: During travel, hard rollers are too loud
and wear too quickly. When raised in the trailers, the trolley
wheels are not under load. The trailer wheels are designed for
driving, so they are quiet and low-wear.
•t Precise lane guidance: The frame of the trailer allows for
much more precise lane guidance. In contrast, trolleys with
four steering rollers have no lane guidance.
•t Easy to use: Thanks to their lifting platform, the GTE trailers
also allow for the easy insertion and removal of the trolleys.
The Jungheinrich trolleys are therefore the ideal addition to the
GTE and GTP tugger train trailers.