TKO Datasheet Specs0 pages
Thinking Tramp Oil Skimmers?
A Keller TKO Pump/Skimmer rapidly sweeps out
tramp oil, cleans and aerates the entire sump
Get these benefits:
• Extended tool life, improved parts finish
• Smoke and order eliminated
• Multiplied coolant life = Much less machine downtime,
greatly reduced coolant purchase & disposal costs
With these exclusive Keller features
• Patented permanent oil separating (coalescing) element,
never needs changing
• Rugged high flow 1/2" air-operated pump provides rapid
tramp oil removal, circulates & aerates entire sump
• Compact inlet device can access any pump
• No electricals
• Sets up in minutes - Requires minimal operator attention
How the TKO Pump/Skimmer works:
The self-priming air opertaed pump pulls the tramp oil/coolant mixture
from the surface of the sump through the floating inlet device, then through
a cartridge filter which removes any chips from the fliud. The oil/coolant
mixture is then pumped through the patented Keller all-plastic separator
element immersed in a separator tank. The cleaned coolant continuously
returns to the sump. The oil layer collects on the top of the separator tank
and is occasionally drained into a waste oil container, simply by opening
the oil drain valve. No other operator attention is required.
Selecting and Installing a TKO Separator:
Three models of TKO Separators are offered, to satisfy any
combination of pump size, oil loading, and coolant characteristics.
[Selection criteria listed in the table below] Each TKO Separator
is shipped by UPS complete, ready for setup. The customer supplies
only a 1/4" compressed air line. The unit may be set on the floor
adjacent to the sump, or hung on the machine tool using the CLO-1
magnetic frame(see photo).
Model TKO-14. Footprint (all models) - 14" x 14"
Model TKO-6 mounted to machine tool with
CLO-1 magnetic frame.
Ordering Designation
For Sump Sizes
Tramp Oil Loading
Oil Rejection Rate of Coolant
Footprint
Height
Weight
Compressed air requirements
Electricals
Ordering Information
TKO-6 TKO-10
Medium Large
Moderate Heavy
Efficient Slow
Specifications
14" x 14" (all models)
24" 30"
39 lbs. 47 lbs.
0.5 SCFM @ 20 to 125 psig
None (all models)
Accessory Items (All Models)
Replaceable filter element, 150 micron, 10" long
Optional bag filter with 5 filter bags
Pack of 5 25-micron filter bags for BA-0475
Additional Inlet Devices (one #555-07 supplied with each unit):
Compact floating inlet device
Fixed inlet device (Requires only 3" diameter access hole)
Floating inlet device
"Cling-On" frame with magnets, to mount TKO-6 to side of machine tool
TKO-14
Large
Very Heavy
Slow
36"
55 lbs.
R10-3150
BA-0475
RAP-25
#555-05
#555-06
#555-07
CLO-1
Keller Products, Inc. 2007
Keller Products, Inc.
Tel: 1-800-352-8422 • Outside U.S. 978-264-1911 • Fax: 978-264-0221 • www.kellerfilters.com
"