Speciality End Prep Accessories0 pages
Mactech Europe Ltd
Speciality End Prep
Electrically or pneumatically powered for
standard or speciality applications
‘Electric Wart’ EPL
Interchangeable with the pneumatic motor, the ‘Wart’ gear head can easily
convert from Air Driven to Electrically Powered in a matter of minutes, and
requires no special tools or training.
Easily turned “on” and “off”, the powerful variable speed, 1400 watt,
double-insulated motor and proprietary speed reduction spider combine
to develop maximum cutting force at the blade, producing a thick chip and
preventing work hardening without using a cutting lubricant.
‘Z Wart’ End Prep Tool
Electrically or pneumatically powered for
standard specialty applications
Mactech EPL Accessories
The ‘Z Wart’ is a powerful narrow body specialty end prep tool for
applications when tool width is critical and torque needs to be
maximised. A slender 2-5/8” wide, the ‘Z Wart’ adds an additional
right angle drive into the conventional Mactech Wart EPL drive train
that reduces the RPM by half and doubles the torque at the cutting
blade.
The low RPM and high torque of the ‘Z Wart’ make it well suited for
end prep applications that include tube stub removal and weld
overlay.
‘Short Perch Wart’
Accommodating elbows and tees up to 3-1/2”, the ‘Short Perch Wart’
is capable of providing any angle of end prep on pipe fittings up to 31/2” OD while requiring only 3/8” of straight pipe to clamp. Existing
Mactech Wart EPLs can easily be fitted to accept the ‘Short Perch
Mandrel’.
‘Contour Wart’
The ‘Contour Wart’ or ‘Fish Mouth’ , is a specialty end prep tool for
profiling tube ends so they sit evenly on the radius of a header, and
allows for full penetration welds. The profile shape of the end prep is
specific to the application and is ideal when a large number of end
preps of consistent size need to be profiled.
Mactech Europe Limited
Unit 7, Scragg House, Langley Business Park, Langley Rd,
Langley, Macclesfield, Cheshire, SK11 0DG
Tel: 01625 503 306 Fax: 01625 618 147
Email: info@mactecheurope.co.uk www.on-site-machining.co.uk