PIM Series Cable0 pages

PIM Series Cable

1

PIM Series Cable

PIM Series Cable Assembly
MegaPhase’s PIM Series coaxial cables features a solid PTFE dielectric which provides an excellent solution for communication systems. This cable is
constructed with MegaPhase’s industry leading GrooveTube® technology and offers excellent phase and amplitude stability.
PIM Series Cables are cost effective and are available with Type N, SMA and 7-16 DIN connectors. MegaPhase Low PIM cable assemblies are an
excellent choice when passive intermodulation-distortion is critical to your signal transmissions They feature intermodulation performance as low as
-165 dBc with a 7/16 SMA or type N connector terminated on our PIM Series cable.

Electrical Data

*Tested at a Frequency of 869 MHz to 896 MHz

Maximum Frequency:t
10 GHz
Impedance: t50 Ω nominal
Propagation Velocity:t
69% nominal
Time Delay:t
1.47 ns/ft (4.82 ns/m)
Shielding Effectiveness:t
-110 dB minimum (connector dependent)
Dielectric Withstanding Voltage:t
10 kV at 60 Hz
Capacitance:t
29.0 pF/ft. (95.1 pF/m)
Passive Intermodulation (PIM):t
-165 (dBc) Minimum*

Mechanical Data
Finished Outer Diameter:t
Static Bend Radius: t
Weight with Standard Jacket/Armor:t
Crush Resistance:t
Operating Temp. Range: t

0.285 in (0.724 cm)
1.5 in (3.81 cm)
0.05 lbs/ft (0.067 kg/m)
250 lbs/linear in (44.6 kg/linear cm)
-67 to 275° F (-55 to 135° C)

Cable Construction
Inner Conductor:t
Dielectric: t
Outer Conductor: t
Standard Finish: t

Solid Ag-plated Cu
PTFE
GrooveTube® Cu
Polyolefin over Metallic Braid

Available Connectors
Type N, SMA (10 GHz max freq.)
7-16 DIN (6 GHz max freq.)

122 Banner Road
Stroudsburg, PA 18360-6433 USA
+1(570) 424-8400
Solutions@MegaPhase.com | www.MegaPhase.com