Air Classification Laboratory Services0 pages
The air classifier laboratory offers a full range of separation options with a high
degree of accuracy in scaling for full size models. The laboratory offers testing
facilities suitable for dry separations from 1.4 mm (12#) down to 10 μm (#1250).
Testing can be conducted with the gravitational, gravitational inertial, centrifugal
and cyclonic classifiers dependant on the separations required. Testing is simple
and straightforward to conduct and we welcome visitors to observe testing.
For accurate testing, samples need to be representative of the proposed feed.
Fresh samples should be taken from conveyors and not from stockpiles. Once
sampled, the samples need to be sealed so the site moisture level is retained.
Samples are normally sent in barrels or buckets to the test laboratory. The
moisture level in the sampled feed should also be noted to ensure that there
is no change during shipment.
Before samples can be sent, the laboratory manager must be contacted for
a copy of the sample shipping form. This must be completed and returned
along with the required documentation outlined on the form. Samples sent
without necessary documentation will be refused.
Shipping Address
Contact Information
Metso Minerals Industries, Inc.
Classifier Lab
205 North 5th Street,
Lebanon, PA 17046 USA
John Gettle – Test Plant Manager
Mobile: +1 717 855 3661t
john.gettle@metso.com
2864-03-13-SBL/Pittsburgh
Centrifugal, Gravitational Inertial and Gravitational laboratory classifiers
For more information, contact your local Metso representative.
2715 Pleasant Valley Road
York, PA , USA 17402
Tel: +1 717 843 8671
Fax: +1 717 845 5154
www.metso/air classifiers.com
Specifications in this document are subject to change without notice.
Product names in this publication are all trademarks of Metso Corporation.
Mining and Construction
Full laboratory testing services to support Metso air classifier
products and to give precise results.
Air Classification
Laboratory Services
"