Maxstar 150 STL0 pages
Issued May 2014 • Index No. DC/27.1
Maxstar 150 STL
®
Light Industrial Applications
Quick
Specs
Processes
Process Pipe
Dairy Industry
Food/Beverage Industry
Restaurant/Kitchen Repair
Experimental Aircraft
Shipboard Installation/Repair
Maintenance Repair
TIG/Stick Welding
Power Source
Lift-Arc™ TIG (GTAW)
Stick (SMAW)
Input Power
Single-Phase Power
Amperage Range 115 VAC: 5 – 150 A (DC TIG)
20 – 100 A (DC Stick)
230 VAC: 5 – 150 A (DC TIG)
20 – 150 A (DC Stick)
Max. Open-Circuit Voltage 90
Net Weight 13.7 lb. (6.2 kg)
Single amperage range allows
operator to accurately set
amperage on both 115 or
230-volt primary power.
Allows for any input voltage hookup
(115–230 V) with no manual linking,
providing convenience in any job
setting. Ideal solution for dirty or
unreliable power.
Inverter-based, DC power source
has a simple-to-use operator
interface providing only the
necessary controls in a compact
machine.
Hot Start™ adaptive control provides
positive arc starts without sticking.
Best-in-class Stick arc characteristics for those demanding jobs.
Multi-Voltage Plug (MVP™) allows
for connection to 115 or 230-volt
receptacles without tools by choosing
the plug that fits the receptacle and
connecting it to the power cord.
Low OCV Stick is a simple design
that reduces the open-circuit
voltage to 12–16 volts when the
welding power source is not in
use. This circuit design is now
built into the Maxstar 150 STL
eliminating the need for add-on
voltage reducers.
Portable in the shop or at the job
site — at 13.7 pounds, the shoulder
strap allows the end user to easily
move from location to location.
Lift-Arc™ start provides TIG arc
initiation without the use of high
frequency.
Full function remote control for
precise amperage control for critical
welds on thin materials (6-pin
fingertip or foot control available.)
Thermal overload protection
with indicator light helps prevent
machine damage if the duty cycle
is exceeded or airflow is blocked.
TIG/Stick Package (#907 135 017) comes complete with:
Maxstar 150 STL power source
10-ft. (3 m) MVP™ power cord
MVP™ plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A)
X-CASE™ provides protection in transport and storage
Remote fingertip control
Weldcraft® A-150 (WP-17) 12.5-ft (3.8 m) TIG torch with connector
Stick electrode holder with 13-ft. (4 m) cable and 25-mm
Dinse connector
Work clamp with 10-ft. (3 m) cable and 25-mm Dinse connector
Miller | Smith flow gauge regulator with gas hose
AK2C accessory kit
Shoulder strap
Power Factor Corrected (PFC) for
optimum performance especially
on 115 volt — reduces nuisance
breaker tripping.
Fan-On-Demand™ power source
cooling system operates only when
needed, reducing noise, energy use
and the amount of contaminants
pulled through the machine.
Built-in gas solenoid eliminates the
need for bulky torch with a gas valve.
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
Equipment Sales US and Canada
An ITW Company
1635 West Spencer Street
P.O. Box 1079
Appleton, WI 54912-1079 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
MillerWelds.com
"