Series 11 (AM)0 pages
O/B/N AM
MINIATURE ROTARY WAFER SWITCH
• Compact, Flexible Switch Package
• Available in Commercial & Military Version
• Variety of Switching configurations
* Optional water sealing
• Resistor & capacitor decade options
• Optional BCD outputs
• Dropping Circuits
SPECIFICATIONS | OPTIONS AVAILABLE |
Angleofthrows : 30°,36°,45°,60°,&90° available Contact rating : Silver plated brass contacts can switch 0.5 Amp load (resistive) at28VDC and 0.25 Amps (resistive) at 110 VAC. Silver alloy contacts can switch 1 Amp (resistive) at 28 VDC and 0.5 Amps (resistive) at 110 VAC. Contact rating requirements on resistive loads as per SRW02ofJSS51207 200mA at 28 VDC 50mA at 230 VAC Contact resistance : 3 to 15 milliohms between adjacent contacts. Insulation resistance : 1,000 Megohms Min. Dielectric strength : 750 VAC at sea level Temperature range : -65°Cto+85°C Finishes : All component parts requiring plating are cadmium, nickel or zinc plated and passivated as per our standards. | Stops Fixed stops at total number of positions specified are standard. If OFF position is required, please indicate whether it is to be at the first or last switch position. Spring Return Various combinations are available for returning switch to the last-but-one position from the last position. Reliable spring return action is possible only with switches having less than 3 wafers. The first spacing between index and first wafer (and overall switch length behind front mounting surface) will increase by about 6.00 mm to accommodate the spring return mechanism. Water Seal 'O' ring sealing is available for both shaft and index housing. Water sealing meets JSS requirements. Clip Terminals Standard is 60 bend on terminals. Flat and reverse clips are also available on request. Printed circuit Terminals Silver plated Brass PC. terminals are available assembled with the switch clips (See figure for terminal details and drilling pattern). Electrostatic shields, mounting brackets, etc. are available as standard and can be supplied when specified. Gold Flashing/Plating Gold flashing or gold plating can be provided over silver alloy when specified to improve storage characteristics, dry circuit switching, increase reliability when used infrequently or in corrosive atmospheres or limit contact resistance variation: (See under military specifications for rating of switches to JSS). |
O/E/l liulin Limited
"