nylacast_moly_20 pages
NYLACAST
Nylacast Moly
Nylacast Moly is a cast nylon 6 material in which improved
crystallisation occurs by the addition of occurs by the
addition of Molybdenum Disulphide. On account of this
the superficial hardness increases (providing excellent
machine ability) and simultaneously the general mechanical
and anti-friction properties are improved. Due to the fact
that the crystal structure breaks down immediately before
the melting temperature is reached, the thermal properties
of the material are improved over the basic grade.
MoS2 provides a degree of self lubrication leading to an
improvement in the wear properties of the material. These
improved properties, combined with lower water absorption
extend the range of applications that Moly has over Natural
cast nylon. Dynamic bearing applications at elevated
operating temperatures of up to 105 °C are particularly
suited to this material.
Benefits of Nylacast Moly
Increased superficial hardness provides excellent
machine ability
Improvement in wear properties as a result of
dry lubricant
Improved anti-friction properties
Improved mechanical properties
Elevated operating temperatures
Lower water absorption
Improved dimensional stability
Excellent chemical resistance properties
Good PV and load bearing capabilities
Extended range of applications
Industry Users
Aerospace
Railways
Ship building
Food and food packaging s
Steel mills
Quarrying and mining
Cranes
Conveyor
Offshore
Agriculture
Waste Management
Construction
Typical Applications
Sheaves
Rollers
Spacers
Slide pads
Chain sheaves
Wear strips
Spacer
Wear pads
Bearings
Bush
Chain Wheel
Hose Clamp
Wear plates
Bespoke Components
Nylacast Moly is available as standard plate, rod and over
thousands of tubes OD/ID configurations in four different
lengths.
In addition cut piece derivatives, strips, billets, discs and
rings up to 2.5 metres diameter as well as custom castings
to specific designs are available
T 0116 276 8558 F 0116 274 1954 Esales@nylacast.com Wwww.nylacast.com
"