Add-on Options0 pages
A safe choice
Add-on options for mixing systems – part 1
Vertical and horizontal mixing systems are well-proven
MTI provides various chopper knives in special sizes
for bulky materials and applications in the mechanical
and geometries to match the demands of each
process technology. Therefore they are installed in
application, also for highly abrasive products or fibers.
almost every known production process and for nearly
Numerous knife sets differing in its number of blades
all components. However, it often needs specific details
and material are available to comply with almost every
and add-ons to customize the mixer for a specific
mixing requirement.
application with its typical characteristics.
Addition of fluids
Chopper
2 Lance in the vessel wall
1 Universal mixer Uni tec® with chopper
In many products and processes liquids with most
Every MTI high performance mixer is designed for an
absolute homogeneous mixing of the substances in use.
Special applications do not only require material friction
to close up clusters or agglomerates in an adequate
time, also the installation of an additional chopper is
necessary. The chopper, mainly consisting of motor,
shaft with bearing and a set of mixing blades being
tangentially installed in the vessel, is most appropriate
for this function. Its position in the vessel is adapted to
different material properties and quantities have to be
added. The target is to have a directed feed into the
vortex with a minimum wetting of the vessel surfaces.
This is the only effective way to prevent product stickings
caused by an often dusty atmosphere inside the mixing
vessel,
sticking
otherwise
possibly
having
an
uncontrolled impact on the mixing result. In its mixer
layout thus MTI focused on an addition system directly
spraying the fluid into the mixture.
the mixing process. The chopper tools are in permanent
contact with the mixture and the force-guided product
can be well dispersed.
By means of a lance set into the vessel wall or lid the
fluid components are sprayed directly into the vortex.
MTI Mischtechnik International GmbH · Ohmstraße 8 · D-32758 Detmold
Tel. +49 (5231) 914 0 · Fax +49 (5321) 914 299 · info@mti-mixer.de · www.mti-mixer.de
09/2011
"