Oseco Sanitary Pressure Relief System0 pages
Oseco
nnnnSaniti
nnnnPRO-S
nnnnRupture Disc
nnnnThe Oseco PROS is a high performance,
nnnnreverse buckling rupture disc. It is ideal
nnnnfor SIP/CIP applications and is made to
nnnnmeet the highest bioprocessing stan-
nnnndards.
nnnnThe PROS is precision scored on the vent
nnnnside and utilizes Oseco's unique comput-
nnnnerized load cell technology, enabling its
nnnnsmooth side to face your process materi-
nnnnals with minimal product buildup.
nnnnThe PROS is nonfragmenting, tempera-
nnnnture tested, and vacuum-ready. The disc
nnnnrequires no special or proprietary disc
nnnnholders, as it is designed for easy installa-
nnnntion into standard ferrule connections.
nnnnStandard Material - 316L
nnnnZero Manufacturing Range
nnnnOperates to 90% of Stamped Pressure
nnnnNon-Fragmenting Design
nnnnWithstands Full Vacuum
nnnnGood for Gas or Liquid Service
nnnnExcellent for High Cycling Applications
nnnnPaintless Tag to Meet ASME Bioprocessing
nnnnStandards (ASME BPE-2009 SD-3.8(m))
nnnnElectropolishing Available
nnnnPROS Minimum and Maximum Burst Pressure at 72°F (22°C)
nnnnLine Size | Minimum psig | Pressure barg | Maximum psig | Pressure barg |
1.0" DN 25 | 40 | 2.8 | 150 | 10.3 |
1.5" DN 40 | 32 | 2.2 | 120 | 8.3 |
2.0" DN 50 | 27 | 1.9 | 90 | 6.2 |
3.0" DN 80 | 20 | 1.4 | 75 | 5.2 |
4.0" DN 100 | 16 | 1.1 | 70 | 4.8 |
Burst Tolerance: ±5% at or above 40 PSIG, ±2 psig below 40 psig
nnnnThe maximum operating temperatures for the PROS gaskets are 400°F for silicone,
nnnn400°F for Viton® and 230°F for EPDM. Contact factory for ratings of other materials.
nnnnGasket Materials (FDA Approved)
nnnn• Silicone(Platinum Cured) • Tuf-Steel
nnnn• EPDM • Parylene Coat-
nnnn• Viton® ings Available
nnnnOther materials may be available upon request
nnnnPackaging
nnnnOseco's sanitary rupture discs are hygieni-
nnnncally cleaned and sealed in a nitrogen purged
nnnnbag before shipping. Every disc is individually
nnnnboxed.
nnnnCertifications Available
nnnn• ASME/UD • PED
nnnn• Burst Test Certifications • 3A
nnnn• Mill Test Reports • FDA Class VI
nnnn• Material Finish (gaskets)
nnnnMaterial Finish
nnnnOseco's 316L stainless steel has a standard
nnnn8-12Ra finish. Electropolished material is available
nnnnupon request for special applications.
nnnnAccessories such as clamps, ferrules, and burst indicators are available.
nnnnContact our customer service team for assistance
nnnn• Products
nnnnSensor
nnnnThe Oseco sanitary sensor (OSS) is de-
nnnnsigned for use with Oseco sanitary rupture
nnnndiscs.
nnnnThe burst sensor represents a simple, ef-
nnnnfective means of indicating the bursting of
nnnna rupture disc. Upon rupture the disc alarm
nnnncircuit is opened by the flowing media. The
nnnnopen circuit may be used to activate a va-
nnnnriety alarms including computer controlled
nnnnsystems.
nnnnThe sensor comes ready to install with 18" of 2-conductor shielded cable with
nnnnopen leads.
nnnnAvailable in sizes 1" to 4". Paintless tag available upon request.
nnnnElectrical Data | |
Max Current | 150 mA |
Temperature Range | -60° to 300°F |
Max Pre-burst Resistance | 50 Ohms |
This sensor may be used at any voltage provided
nnnnthe maximum current requirements are not ex-
nnnnceeded.
nnnnMaterials | |
Gasket | Silicone (Platinum Cured), EPDM, Viton®, and Tuf-Steel. Parylene coatings available. Special materi- als available upon request. |
Membrane | Teflon |
Circuit Track | 316 SS |