Pall VRF Varnish Remediation System0 pages
Datasheet PGVRFDSENb
nnnnPALL) Pall Corporation
nnnnPall VRF
nnnnVarnish Remediation System
nnnnWhen varnish forms in combustion turbine lubrication and
nnnncontrol systems, the effects can be devastating. Significant
nnnnvarnish build-up leads to:
nnnn• Sluggish control and/or equipment reliability issues
nnnn• Unscheduled maintenance operations/excessive parts
nnnnreplacement
nnnn• Problematic start-ups and/or shut-downs
nnnn• Forced equipment outages and lost production time
nnnnAs the leader In gas turbine lubrication and hydraulic fluid
nnnncontrol, Pall Introduces a very efficient, simple, and proven
nnnnvarnish removal system. Pall VRF (Varnish Removal Filter)
nnnnwill dramatically reduce the varnish potential of the fluid,
nnnnensuring long, healthy operation, and control of gas
nnnnturbines.
nnnnPerformance
nnnnField experience with Pall VRF on gas turbines showed
nnnna rapid and stable reduction In varnish potential rating
nnnn(VPRSM)1 well below the recommended levels. Pall VRF will
nnnnmaintain low varnish potential as the entire system gets
nnnncleaned up over time, literally pulling varnish off surfaces for
nnnnremoval. A turbine can be rid of varnish Issues in a matter of
nnnna few weeks. The combination of Pall SRT filter technology
nnnnto control varnish formation and the Pall VRF to remove
nnnnexisting varnish will ensure elimination of varnish-related
nnnnproblems.
nnnnFeatures
nnnn• Conforms to the ANSI B31.1 - Power Piping Code and
nnnnthe ANSI B31.3 - Process Piping Code
nnnn• Varnish removal vessel with specially designed adsorptive
nnnnmedia, optimized for removal of varnish-forming
nnnnprecursors from the oil
nnnn• Outlet filtration with Pall Ultipleat® SRT technology
nnnnantistatic and rated at 312(c) >1000 for additional
nnnnprotection and cleanliness
nnnn• Control system designed to maintain optimum oil
nnnntemperature for the most efficient removal of varnish
nnnn• Simple, reliable operation requiring minimal operator
nnnnattention
nnnnBenefits
nnnn• Simple, automated, and proven long-term efficiency
nnnn• Applicable to all turbine reservoir sizes
nnnn1 VPRSM is a registered service mark of Analysts Incorporated
nnnnPall VRF equipped with standard cooler option.
nnnn• Faster system clean-up, usually within a few weeks
nnnn• Low energy consumption
nnnnApplications
nnnn• Combustion turbine lubricating and control systems
nnnn• Steam turbine lubricating and control systems
nnnn• Industrial hydraulic fluids
nnnnDimensions
nnnnWidth: 40" (1,016.0 mm)
nnnnLength: 76" (1,930.4 mm)
nnnnHeight: 66" (1,676.4 mm)
nnnnWeight: Approx. 1,570 lb. (712.2 kg)
nnnnDesign Characteristics
nnnnFlow Rate: 11 gpm (41.6 Ipm) @ 60Hz
nnnnMaximum Inlet Viscosity: 500 SUS (100 cSt)
nnnnInlet Pressure Range: -14"Hg (-0.47 Barg) to 10 psig
nnnn(0.69 Barg)
nnnnMaximum design temperature: 160°F (71 °C)
nnnnStandard electrical: 480V, 3 phase, 60 Hz; FLA = 8.0 amps
nnnnCooler motor power: 2 HP
nnnnPump motor power: 1.5 HP
nnnnConnection size: Inlet - 1.0 NPT, Discharge - 0.75 NPT
nnnnPiping: Stainless Steel Tubing - no flexible hoses
nnnnFiltration. Separation. Solution.su
"