Fastener Length Monitoring Device0 pages

FLM-406

Fastener Length Monitoring
(FLM) System Option
The PEMSERTER® Fastener Length Monitoring
(FLM) System attaches to a
Series 2000® automatic feed press and verifies
the lengths of the studs and standoffs being
installed. The FLM system will flag and reject a
fastener that does not meet the length criteria
initially designated during setup by the operator.
The systems photoelectric sensors can identify a
fastener’s length within 1/16” or 2mm.
The Series 2000 software easily guides the operator through setup and use of the FLM system.
Only proper length fasteners will be installed. If
a fastener is rejected, the operator is notified and
the system seeks a part of the correct length.
The FLM system can eliminate errors and reduce
costs due to incorrect part loading or in-house
mixed part situations.
FLM Software is available on all new PEMSERTER
Series 2000 presses. Some recent models can
also be retrofitted. Call us to find out more.

How to Order Components
for the FLM System
006400 FLM sensor package
8

The sensor package consists of the
following:
1. The sensing unit body and cover.
2. Sensors and hardware.
3. Quick connect cable and plug.
4. Acrylic cover.

006401 (small adapter) or
8
8006402 (large adapter)
Each adapter consists od the
following:
1. One adapter, large or small.
2. Two pair of anti-vibration
proof washers.
3. Two Lock-nuts.

Adapters are installed at our factory. They
can also be changed in the field.

ee Part No. List for FLM
S

chanmbers
Each chamber is designed for the
entire range of lengths of a specific
size fastener.
The chambers are designed to fit
onto existing PEMSERTER shuttle
tooling.

PennEngineering • www.pemnet.com