Nickel anti seize lubricant 771240 pages

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139

Technical Data Sheet
Permatex Nickel Anti-Seize
Lubricant
AAM Revised 10/02

PRODUCT DESCRIPTION
S.I.N.: 834-300
Permatex Nickel Anti-Seize Lubricant is a high temperature,
high quality, heavy duty lubricant that resists galling and
corrosion and reduces wear in heavy pressure applications. It
contains tenacious metals, oils and graphite materials that
cannot be burned away or removed by slow moving parts.
This product withstands temperatures ranging from -65°F to
2400°F (-54°C to 1316°C). It is recommended for use where
copper contamination must be avoided, under conditions of
extreme pressure and temperature and with stainless steel,
titanium and nickel alloys.
PRODUCT BENEFITS
Permatex Nickel Anti-Seize was designed specifically for
use on stainless steel or similar alloys. It protects threaded
fasteners and fittings from heat, freezing, seizure or galling at
temperatures from -65°F to 2400°F. It may be used on
pumps, sensors, valves, nuts and bolts where extreme
conditions of heat exist.
TYPICAL APPLICATIONS
• Exhaust manifold bolts
• Exhaust system bolts
• Muffler clamps
• Tailpipe assemblies
• Catalytic converter assemblies
DIRECTIONS FOR USE
1. Clean mating surfaces before application.
2. For best results, apply to clean, dry surfaces.
3. Clean surfaces with Permatex Brake & Parts Cleaner.
4. Wire brush any loose surface rust.
5
Apply Nickel Anti-Seize to the parts that require
protection.
6. Reassemble parts using normal torque values.
7. Wipe off excess material.

GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number
77124
77164

Container Size
8 oz. brush-top bottle
16 oz. brush-top bottle

STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8_C to 28_C
(46_F to 82_F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.

For Cleanup
1.
Clean parts with disposable towel.
2.
Clean hands with Permatex brand hand cleaners.
PROPERTIES OF MATERIAL
Chemical Type
Appearance
Odor
Specific Gravity
Temperature Range, _C (_F)
Viscosity, cPs
Flash Point, °C(°F)
NFPA 704 Flammability Rating

Typical Value
Mineral oil, nickel, graphite
Gray paste
Petroleum
1.1
-54(-65) to 1316(2400)
200,000 (base)
93(200)
1

NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)