Pronic - ST Range - In-die Tapping Unit0 pages

Strip Following system
(pressure pad)

Gearbox

Drive Screw

Tap micro-lubrication
nozzle

Dimensions:

ST Tapping Unit

STS unit with mechanical motorization

The most efficient single tap solution

Stroke counter
(option)

The most efficient solution for
your application with 1 tapped

Standard rollforming tap
(quick release system).

hole and material lift.
• The integration of the tapping unit in the die is really
simplified.

Lubrication tube
for the drive screw

Torque Limiter (option)

Option: Torque limiter

• The kinematic is totally controlled and guarantees
the best optimized target speed: The tapping
operation starts at the end of feeding, before the
stripper contact.

STS unit with electromechanical motorization

A torque limiter, adjustable
from 18 to 33 Nm [13.28 to
24.33 ft-lb] can be installed
onto the motorization.

• This modular series offer several possible
configurations, with universal motorizations that
can be use with multiple dies.
• The transmissions are universal and simplified

To avoid any risk of
breakage, this sensor
will send a signal to stop
the press if an overload
occurs and exceed the

The tapping head can be driven by a mechanical
or servo-driven motorization, which are fully
interchangeable.
The two pieces design makes the handling of the
unit much easier and reduces the downtime for tap
change.

• User-friendly: No special tools are required to
service the unit and the reduced weight tapping
head facilitate the handling. The correct location of
the tapping head and motorization is ensured by
push lock locating pins.

Self-powered
total
counter – IP65 with 8 digits
LCD screen.

Advantages:
•t
•t

What's included:
-Tapping unit configured for your project
-Hardware to install the unit in your die
-Tap wrench
-Technical handbook, application sheet and user manual
-BOM and drawings

PRONIC - 170 rue des techniques - F-74970 Marignier
Tel: +33 450 89 49 49 - Fax: +33 450 89 49 49 - infos@pronic.com - www.pronic.com

ST Range - FIPT-019b - EN - 10/2014

STn unit with tapping from bottom to top

Ultra-light tapping head for fast and easy tap
change.
Integrated strip follower function that dramatically
simplify the die.

•t

•t
•t
•t
•t
•t

These tapping units are designed with a detachable
tapping head to be used for single tap applications.

• The function of strip follower is integrated in within
the tapping unit.

Option: Stroke counter

Allows
to
manage,
preventive maintenance,
production runs and tap
changes, easily.

The only single tap tapping unit
on the market with a detachable
tapping head, integrated strip
following feature, and optional

Interchangeability of the motorization (mechanical
or servo-driven) to help reduce your investment

•t

Oil bath lubrication system to get the optimum
performance and life out of our product.

•t

Optional torque limiter to protect your production

•t

Optional cycle counter to
maintenance

facilitate

your

www.pronic.com