SL-530 pages
SL-53 Expansion Joint
Ǡ Triple Arch
Ǡ Slips over pipe for easy connection
Ǡ Designed for low pressure systems
Ǡ More lateral movement than SL-50
Ǡ Vibration and sound elimination
Ǡ Absorbs movement in pipeline
Ǡ Made in U.S.A.
The Slip-On Series SL-53 Triple Arch Expansion Joints are
designed to allow for greater contraction, expansion, and
lateral movement than the SL-50. The internal diameter of
the SL-53 is equal to the outside diameter of replacement
pipes. The SL-53 slips over the ends of an open pipe and is
secured by clamps.
Construction consists of a tube made of natural or synthetic
rubber, a hand fabricated body consisting of high quality
synthetic fabric for reinforcement, and a cover wrap used to
protect the unit against occasional contact with oil, weathering, ozone, and corrosives.
The SL-53 Triple Arch Expansion Joint is simple and economical to use. The SL-53 Expansion Joint will absorb movement
from vibration, thermal expansion and contraction, and allow
for misalignment of piping.
A
C
Ǡ ELASTOMERS
Pure Gum Rubber, Neoprene, Hypalon®,
Chlorobutyl, Buna-N, EPDM, and Viton®
C
CUFF
CUFF
B
For dimensions of the SL-53, see page 14.
SL-100 Vibration Pipe
Ǡ Designed for low pressure systems
Ǡ Slips over pipe for easy connection
Ǡ Vibration and sound elimination
Ǡ Absorbs movement in pipeline
Ǡ Made in U.S.A.
The Slip-On SL-100 provides a very simple and effective
way to reduce vibration and movement in low-pressure
applications. The slip-on configuration of the SL-100 allows
a section of pipe to be removed, and the rubber connector
to be slipped into place. Stainless steel bands are provided
for a secure connection.
The SL-100 acts as a rubber isolator to prevent vibration
from being transmitted from moving parts, such as pumps
or compressors. By isolating vibration, it also eliminates much
of the noise that is transmitted as well. The flexibility of the
joint can help compensate for movement between two pipes.
A
C
Ǡ ELASTOMERS
Pure Gum Rubber, Neoprene, Hypalon®,
Chlorobutyl, Buna-N, EPDM, and Viton®
For dimensions of the SL-100, see page 14.
B
C
CUFF
CUFF
"