ARMAK Gas Pressure Motor GGP16XA0 pages
Armak Gas Pressure Motor i^\j^€n^ft.
GGP16XA as Generator Drive ^/MOTOR EN
Armak Gas Pressure Motors are designed to drive
electric generators. GGP Gas Pressure Motors are driven
by non corrosive gaseous media at temperatures below
150°C, with pressures up to 15 bar.
Technical details and product advantages:
• frictionless torque producing motor parts
resulting in long and maintenance free lifetime
• completely enclosed motor casing
without leakage
• compact design and freedom of installation
• metric flange + shaft
The torque is developed by one rotating piston (in the picture the one the left), which is
part of the output shaft. The sealing rotor is running without physical contact and with an
extremely small gap for high motor efficiency.
This frictionless operation results in a long
maintenance free operation without downtime.
The applications for Armak Gas Pressure Motors are ORC-Systems. Heat sources
like for example Solar Technology (collectors / mirrors) or Combined Heating and Power
Systems (exhaust of the combustion engines) are fed into a heat exchanger. A suitable
fluid is inserted and vaporised. Pressurised gas up to 15 bar can be produced and
delivered to an Armak motor which in turn drives a generator to create electric power.
Or can supply the ORC key components, the fluid metering pump and the gas pressure
motor.
Armak Gas Pressure Motors must be ajusted to the pressure fluid (vapour) used
as some media attack and destroy bearings and seals.
Technical Data
Gas Pressure Motor GGP16XA
Motor | GGP16 | |
max. power at 15 bar | kW | 30 |
max. power at 6 bar | kW | 14 |
max. operating pressure | bar | 15 |
speed - max. power / 6 bar | rpm | 3.000 |
torque - max. power / 6 bar | Nm | 50 |
start torque at 6 bar | Nm | 48 |
max. continuous speed | min"1 | 4.000 |
recommended min. speed | min"1 | 1.000 |
gas connection | G 2" | |
temperature range | °C | max +150 |
radial force - middle of shaft | N | 100 |
axial force on shaft | N | 50 |
weight | kg | 82 |
Armak GmbH - Motoren Fon +49 7154 82400 www.armak-motor.de
Enzstr.39 D-70806 Kornwestheim Fax +49 7154 824080 info@armak-motor.de
GeschaftsfuhrerWolf Krisch HRB 207012 Stuttgart ID-Nr DE814130032
Blatt 1 VOn 3 a6204 GGP16XAdat-1420e
"