Turbo T-18-3 Automatic Centrifuge0 pages
TURBO SEPARATOR 3-PHASE CENTRIFUGES T10-3 T14-3 Օ T18-3 High-efficiency, automatic and manual centrifuges for the 3-phase clarification of: WATER-SOLUBLE COOLANT Օ SEMISYNTHETIC COOLANTS SYNTHETIC COOLANTS Օ AQUEOUS PARTS WASHER CHEMICALS Ail TURBO SEPARATOR 3-phase units operate with high G force to remove both tramp oil and fine solids from machine tool codants and parts washer fluids. TURBO SEPARATORS are idal for grinding applications due to their large solids holding capacity. TURBO SEPARATORS are designed for the continuous clarification of process fluids contaminated by oils. Thse units will remove a wide range of particles 騗 ferrous and non-ferrous, glass, graphite and ceramic down to 2 micron. The T10-3 is a complרte centrifuge System which automatically discharges cleaned codant into a storage tank, oil into a dcantation tank and periodically removes solids via a self-draining, easily-cleaned removable liner. Other components include transfer and feed pumps, valving and controls. The T10-3 can be installed as a free standing batch process unit, integrated with a single machine tool or for on-line side stream processing from central coolant Systems. Processing capacity is up to 90 GPH. T10-3 The T14-3 separators have process capacities to 150 GPH. Cleaned coolant and tramp oil are automatically removed from the centrifuge and solids removal is achieved via a self-draining, easily-cleaned removable iner. This centrifuge can be free-standing, tank mounted or supplied with a portable base. The unique centrifuge feed system limin驢tes the need for a centrifuge feed pump and cleaned coolant is removed under pressure, eliminating the need for a System return pump. A dcantation tank improves the quality of removed tramp oil, allowing reusable coolant to be directed back to the coolant cleaning process. For use when recycling aqueous parts washer chemicals, the T14 is available in either anodized aluminum or stainless steel. T14-3 SHOWN PROCESS TANKAGE The T18-3 separator is a fully automated self-cleaning centrifuge with process capacities to 8 GPM. Like the T10 and T14 units, cleaned coolant and tramp oil are automatically removed from the centrifuge and, in the T18, solids are also removed automatically by means of a clutch drive scraper mechanism to allow continuous and unattended opration for coolant cleaning. Systems are available for batch purification with process tankage or in conjunction with central coolant Systems. f?SANBORN ^jTechnoloqies T18-3 INSTALLED WITH CHILLER UNIT
"