Guidewire Feeding System0 pages
Royal Master Grinders, Inc.
Guidewire Feeding System
The Royal Master Guidewire feeding system is a new
system developed by our engineering team to be fast, easy
to use, universal and robust: Our team took our decades
worth of experience and designed a new feeding system.
This system uses a vacuum to pick up a wire, one at a time. To verify that only
one is picked up, a laser sensor measures the wire. The wire will then be
placed in an “on deck” station while the current wire is grinding. The new wire
will be dumped into the feeder, and quickly expressed into the wheels using
the 2” diameter capstain rollers. These rollers will not wear out as quickly as
smaller rollers. The wire can be ground using a time based system, or the wire
can be retracted from the machine using a photo-eye sensing the back of the
wire. When the wire is finished grinding, it will be expressed out fo the
machine, and rotated to a recepticle under the feeder.
The system can have as many as 10 different sensors to enable the operator to
leave it set-up for your various jobs. Then to change over from job to job, simply
select the part number from the menu in the color touchscreen controller.
The operator interface uses a feature unique to the Royal Master system with
the visual input / output screens. This is simply touch the picture on the screen
and the machine will make the corresponding move.
Feeder Will Work on:
· Standard Machine with or without an autocycle
· Hi-Accuracy Machine (Capable of Multiple Tapers)
· Servo Cycle Machine (Capable of Multiple Tapers)
Operator Interface
Feeder Available in 4’, 6’ and 12’ Lengths
ROYAL MASTER GRINDERS, INC.
"